Analog Devices ADG5404F Evaluation Board EVAL-ADG5404FEBZ

RS tilauskoodi: 898-7289Tuotemerkki: Analog DevicesValmistajan osanumero.: EVAL-ADG5404FEBZ
brand-logo

Tekninen dokumentti

Tekniset tiedot

Kit Classification

Evaluation Board

Featured Device

ADG5404F

Tuotetiedot

Evaluation Board for ADG5404F Multiplexer

The EVAL-ADG5404FEBZ from Analog Devices is an evaluation board for the ADG5404F Multiplexer. It is designed to evaluate the functionality of the ADG5404F device.
The ADG5404F is a 4-channel multiplexer with overvoltage fault detection and protection. The ADG5404F is mounted in the centre of the evaluation board.
3 screw terminals are used to power the device with an optional 4th terminal providing a user-defined digital voltage. Alternatively the user can utilise an LDO regulator for 5 V digital voltage control and supply for the LED. The LED is used to represent the fault status of the switch.

Additional equipment required; ±22 V DC voltage source (dual supply), 44 V DC voltage source (single supply), optional digital voltage source (3-5 V), analogue signal source, voltage measure e.g. digital multi-meter.

Switches and Multiplexers, Analog Devices

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 16,50

kpl (ilman ALV)

€ 20,46

kpl (Sis ALV:n)

Analog Devices ADG5404F Evaluation Board EVAL-ADG5404FEBZ

€ 16,50

kpl (ilman ALV)

€ 20,46

kpl (Sis ALV:n)

Analog Devices ADG5404F Evaluation Board EVAL-ADG5404FEBZ
Varastotiedot eivät ole tilapäisesti saatavilla.

Tekninen dokumentti

Tekniset tiedot

Kit Classification

Evaluation Board

Featured Device

ADG5404F

Tuotetiedot

Evaluation Board for ADG5404F Multiplexer

The EVAL-ADG5404FEBZ from Analog Devices is an evaluation board for the ADG5404F Multiplexer. It is designed to evaluate the functionality of the ADG5404F device.
The ADG5404F is a 4-channel multiplexer with overvoltage fault detection and protection. The ADG5404F is mounted in the centre of the evaluation board.
3 screw terminals are used to power the device with an optional 4th terminal providing a user-defined digital voltage. Alternatively the user can utilise an LDO regulator for 5 V digital voltage control and supply for the LED. The LED is used to represent the fault status of the switch.

Additional equipment required; ±22 V DC voltage source (dual supply), 44 V DC voltage source (single supply), optional digital voltage source (3-5 V), analogue signal source, voltage measure e.g. digital multi-meter.

Switches and Multiplexers, Analog Devices