Toggle Switch Boot Toggle Switch Boot for use with Toggle Switch

RS tilauskoodi: 321-228Tuotemerkki: APEMValmistajan osanumero.: U1331
brand-logo

Tekninen dokumentti

Tekniset tiedot

Merkki

Apem

Accessory Type

Toggle Switch Boot

For Use With

Toggle Switch

Alkuperämaa

France

Tuotetiedot

APEM Toggle Switch Sealing Boots

One of the main reasons switches fail is because they have not been sealed correctly when initially installed. Using sealing boots or hoods provides extra protection and can prolong the life of the components they are used with. Sealing boots prevent the ingress of dust, sand, and moisture from penetrating the switch and causing potential damage or failure.

APEM’s range of sealing boots/hoods are simple and for easy to use. Robustly designed the one-piece construction is made from a moulded toggle cover bonded to a built-in mounting nut. Easy to fit, APEM’s toggle switch boots are used in place of the original mounting nut. This encloses the base of the switch bushing forming a tight seal against the front of the panel face.

The APEM full-toggle (standard) range of sealing boots are made from a choice of tough materials. Either high-temperature Silicone or mechanically resistant Neoprene. Both types of sealing hoods have nickel-plated brass fixing hex nuts with a plain or knurled edge.

Miniature Lockable Toggle Switches

Approvals

UL E187490

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 4,35

kpl (ilman ALV)

€ 5,39

kpl (Sis ALV:n)

Toggle Switch Boot Toggle Switch Boot for use with Toggle Switch

€ 4,35

kpl (ilman ALV)

€ 5,39

kpl (Sis ALV:n)

Toggle Switch Boot Toggle Switch Boot for use with Toggle Switch
Varastotiedot eivät ole tilapäisesti saatavilla.

Osta irtotavarana

MääräYksikköhinta
1 - 24€ 4,35
25 - 99€ 4,15
100 - 249€ 4,00
250 - 499€ 3,90
500+€ 3,65

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja

Tekninen dokumentti

Tekniset tiedot

Merkki

Apem

Accessory Type

Toggle Switch Boot

For Use With

Toggle Switch

Alkuperämaa

France

Tuotetiedot

APEM Toggle Switch Sealing Boots

One of the main reasons switches fail is because they have not been sealed correctly when initially installed. Using sealing boots or hoods provides extra protection and can prolong the life of the components they are used with. Sealing boots prevent the ingress of dust, sand, and moisture from penetrating the switch and causing potential damage or failure.

APEM’s range of sealing boots/hoods are simple and for easy to use. Robustly designed the one-piece construction is made from a moulded toggle cover bonded to a built-in mounting nut. Easy to fit, APEM’s toggle switch boots are used in place of the original mounting nut. This encloses the base of the switch bushing forming a tight seal against the front of the panel face.

The APEM full-toggle (standard) range of sealing boots are made from a choice of tough materials. Either high-temperature Silicone or mechanically resistant Neoprene. Both types of sealing hoods have nickel-plated brass fixing hex nuts with a plain or knurled edge.

Miniature Lockable Toggle Switches

Approvals

UL E187490