Bartec ComEx Series Green, Red, White, Yellow Push Button Head, 30mm Cutout, IP66, IP67, ATEX
Tekninen dokumentti
Tekniset tiedot
Merkki
BartecSeries
ComEx
Cutout Diameter
30mm
Push Button Colour
Green, Red, White, Yellow
Push Button Style
Round
Push Button Material
Thermoplastic
IP Rating
IP66, IP67
Push Button Diameter
30mm
Hazardous Area Certification
ATEX
Terminal Type
Screw
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+70°C
Alkuperämaa
Germany
Tuotetiedot
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 23,20
kpl (ilman ALV)
€ 28,77
kpl (Sis ALV:n)
1
€ 23,20
kpl (ilman ALV)
€ 28,77
kpl (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 4 | € 23,20 |
| 5 - 9 | € 22,40 |
| 10+ | € 21,20 |
Tekninen dokumentti
Tekniset tiedot
Merkki
BartecSeries
ComEx
Cutout Diameter
30mm
Push Button Colour
Green, Red, White, Yellow
Push Button Style
Round
Push Button Material
Thermoplastic
IP Rating
IP66, IP67
Push Button Diameter
30mm
Hazardous Area Certification
ATEX
Terminal Type
Screw
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+70°C
Alkuperämaa
Germany
Tuotetiedot
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.