Bartec Legend Plate for Use with Bartec Push Buttons

RS tilauskoodi: 244-3651Tuotemerkki: BartecValmistajan osanumero.: 05-0044-0001
brand-logo

Tekninen dokumentti

Tekniset tiedot

Merkki

Bartec

Accessory Type

Legend Plate

For Use With

Bartec Push Buttons

Alkuperämaa

Germany

Tuotetiedot

Label Holder

Hazardous Area Actuators & Contact Blocks

Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 6,10

kpl (ilman ALV)

€ 7,56

kpl (Sis ALV:n)

Bartec Legend Plate for Use with Bartec Push Buttons

€ 6,10

kpl (ilman ALV)

€ 7,56

kpl (Sis ALV:n)

Bartec Legend Plate for Use with Bartec Push Buttons
Varastotiedot eivät ole tilapäisesti saatavilla.

Osta irtotavarana

MääräYksikköhinta
1 - 4€ 6,10
5 - 9€ 5,90
10+€ 5,60

Tekninen dokumentti

Tekniset tiedot

Merkki

Bartec

Accessory Type

Legend Plate

For Use With

Bartec Push Buttons

Alkuperämaa

Germany

Tuotetiedot

Label Holder

Hazardous Area Actuators & Contact Blocks

Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.