Fluke I1010 Current Clamp, 1000 A DC Max, AC/DC Adapter, 600 A ac AC Max, Voltage Output - UKAS
Technical Document
Specifications
Brand
FlukeProduct Type
Current Clamp
Adapter Type
AC/DC
Maximum DC Current
1000A
Maximum AC Current
600A ac
Accuracy
±2 % + 0.5 A
Maximum Conductor Size
30mm
Cable Length
1.6m
Output Type
Voltage
Connector Type
4 mm Plug
Battery Life
60h
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
50°C
Standards/Approvals
No
Model Number
I1010
Safety Category Level
CAT III
Safety Category Voltage
600V
Calibrated
UKAS
Country of Origin
Thailand
Product details
Fluke Current Probes
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.
Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V
Supplied With: 9V PP3 alkaline battery and operators manual.
Stock information temporarily unavailable.
€ 900.00
€ 900.00 Each (Exc. Vat)
€ 1,129.50
€ 1,129.50 Each (inc. VAT)
1
€ 900.00
€ 900.00 Each (Exc. Vat)
€ 1,129.50
€ 1,129.50 Each (inc. VAT)
Stock information temporarily unavailable.
1
Technical Document
Specifications
Brand
FlukeProduct Type
Current Clamp
Adapter Type
AC/DC
Maximum DC Current
1000A
Maximum AC Current
600A ac
Accuracy
±2 % + 0.5 A
Maximum Conductor Size
30mm
Cable Length
1.6m
Output Type
Voltage
Connector Type
4 mm Plug
Battery Life
60h
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
50°C
Standards/Approvals
No
Model Number
I1010
Safety Category Level
CAT III
Safety Category Voltage
600V
Calibrated
UKAS
Country of Origin
Thailand
Product details
Fluke Current Probes
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.
Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V
Supplied With: 9V PP3 alkaline battery and operators manual.