Harting, D-Sub Standard Series, Male Crimp D-sub Connector Contact, PdNi Pin, 24 → 20 AWG
Tekninen dokumentti
Tekniset tiedot
Merkki
HartingGender
Male
Wire Size
24 → 20 AWG
Contact Material
Brass
Contact Plating
PdNi
Termination Method
Crimp
Maximum Contact Resistance
≤10MΩ
Contact Type
Pin
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.48mm
Minimum Wire Size AWG
24AWG
Maximum Wire Size AWG
20AWG
Alkuperämaa
Germany
Tuotetiedot
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 0,201
1 kpl (500 kpl/kela) (ilman ALV)
€ 0,249
1 kpl (500 kpl/kela) (Sis ALV:n)
500
€ 0,201
1 kpl (500 kpl/kela) (ilman ALV)
€ 0,249
1 kpl (500 kpl/kela) (Sis ALV:n)
500
Osta irtotavarana
| Määrä | Yksikköhinta | Per Kela |
|---|---|---|
| 500 - 1000 | € 0,201 | € 100,50 |
| 1500 - 2500 | € 0,18 | € 90,00 |
| 3000 - 4500 | € 0,171 | € 85,50 |
| 5000+ | € 0,162 | € 81,00 |
Tekninen dokumentti
Tekniset tiedot
Merkki
HartingGender
Male
Wire Size
24 → 20 AWG
Contact Material
Brass
Contact Plating
PdNi
Termination Method
Crimp
Maximum Contact Resistance
≤10MΩ
Contact Type
Pin
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.48mm
Minimum Wire Size AWG
24AWG
Maximum Wire Size AWG
20AWG
Alkuperämaa
Germany
Tuotetiedot
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807