Safety Enabling Switch, DPDT, IP65
Tekninen dokumentti
Tekniset tiedot
Merkki
IdecContact Configuration
DPDT
Illuminated
No
Contact Configuration
Double Pole Double Throw (DPDT)
Panel Cut Out Size
16 (Dia.)mm
Panel Cut Out Diameter
16mm
IP Rating
IP65
Actuator Colour
Yellow
Voltage Rating
250V ac/dc
Contact Current Rating
500 mA
Actuator Shape
Plunger
Actuator Type
Button
Terminal Type
Solder
Alkuperämaa
Japan
Tuotetiedot
IDEC HE5B Series Pushbutton Enabling Switch
Ideally suited for use as an enabling switch for manual robotic control. To assist the operator the "On" position requires only light pressure to maintain the function, a higher force is then required to switch from the "On" position to position 3. The contact will not close when released from "Off" position 3 to "Off" position 1. For a suitable IDEC "Pendant Grip" switch housing for HE5B, see RS Stock No. 807-7086. The HE5B series pushbutton enabling switch is the RS Stock No. 807-7112. Rubber boot switch button covers are available in Yellow, RS Stock No. 807-7121, in Black, RS Stock No. 807-7124, in Grey, RS Stock No. 807-7128.
Standards
IEC60947-5-1, EN60947-5-1, JIS C8201-5-1, UL508, CSA C22.2 No 14
Enabling Switch
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 61,00
kpl (ilman ALV)
€ 75,64
kpl (Sis ALV:n)
1
€ 61,00
kpl (ilman ALV)
€ 75,64
kpl (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 4 | € 61,00 |
| 5 - 9 | € 58,50 |
| 10 - 24 | € 57,00 |
| 25 - 49 | € 55,50 |
| 50+ | € 52,50 |
Tekninen dokumentti
Tekniset tiedot
Merkki
IdecContact Configuration
DPDT
Illuminated
No
Contact Configuration
Double Pole Double Throw (DPDT)
Panel Cut Out Size
16 (Dia.)mm
Panel Cut Out Diameter
16mm
IP Rating
IP65
Actuator Colour
Yellow
Voltage Rating
250V ac/dc
Contact Current Rating
500 mA
Actuator Shape
Plunger
Actuator Type
Button
Terminal Type
Solder
Alkuperämaa
Japan
Tuotetiedot
IDEC HE5B Series Pushbutton Enabling Switch
Ideally suited for use as an enabling switch for manual robotic control. To assist the operator the "On" position requires only light pressure to maintain the function, a higher force is then required to switch from the "On" position to position 3. The contact will not close when released from "Off" position 3 to "Off" position 1. For a suitable IDEC "Pendant Grip" switch housing for HE5B, see RS Stock No. 807-7086. The HE5B series pushbutton enabling switch is the RS Stock No. 807-7112. Rubber boot switch button covers are available in Yellow, RS Stock No. 807-7121, in Black, RS Stock No. 807-7124, in Grey, RS Stock No. 807-7128.
Standards
IEC60947-5-1, EN60947-5-1, JIS C8201-5-1, UL508, CSA C22.2 No 14