INA HF0612-L564 Sprag Clutch Bearing 6mm I.D., 10mm O.D., 12mm Race Width

RS tilauskoodi: 137-1783Tuotemerkki: INAValmistajan osanumero.: HF0612-L564
brand-logo

Tekninen dokumentti

Tekniset tiedot

Merkki

INA

Inside Diameter

6mm

Outside Diameter

10mm

Race Width

12mm

Alkuperämaa

Germany

Tuotetiedot

Drawn Cup Roller Clutches

INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in one direction and are compact in a radial direction.
Drawn cup roller clutches give precise indexing, since the individual spring loading of the needle rollers ensures continuous contact between the shaft, needle rollers and ramps. They allow high indexing frequencies due to their low mass and the resulting low moment of inertia of the clamping elements. They also have a low overrunning frictional torque.

INA

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 15,20

kpl (ilman ALV)

€ 19,08

kpl (Sis ALV:n)

INA HF0612-L564 Sprag Clutch Bearing 6mm I.D., 10mm O.D., 12mm Race Width

€ 15,20

kpl (ilman ALV)

€ 19,08

kpl (Sis ALV:n)

INA HF0612-L564 Sprag Clutch Bearing 6mm I.D., 10mm O.D., 12mm Race Width
Varastotiedot eivät ole tilapäisesti saatavilla.

Osta irtotavarana

MääräYksikköhinta
1 - 4€ 15,20
5 - 9€ 14,60
10 - 24€ 13,80
25+€ 13,50

Tekninen dokumentti

Tekniset tiedot

Merkki

INA

Inside Diameter

6mm

Outside Diameter

10mm

Race Width

12mm

Alkuperämaa

Germany

Tuotetiedot

Drawn Cup Roller Clutches

INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in one direction and are compact in a radial direction.
Drawn cup roller clutches give precise indexing, since the individual spring loading of the needle rollers ensures continuous contact between the shaft, needle rollers and ramps. They allow high indexing frequencies due to their low mass and the resulting low moment of inertia of the clamping elements. They also have a low overrunning frictional torque.

INA