INA KH12-PP Linear Ball Bearing- Both Sides Sealed 12mm I.D, 19mm O.D
Tekninen dokumentti
Tekniset tiedot
Merkki
INAInside Diameter
12mm
Outside Diameter
19mm
Race Width
28mm
Ball Bearing Type
Linear Ball Bearing
Sealing Arrangement
Both Sides Sealed
Bearing Clearance
CN
Material
Steel
Ball Material
Steel
Cage Material
Polyamide
Number of Rows
1
Static Load Rating
740N
Dynamic Load Rating
800N
Bore Type
Parallel
Partial Bearing Code
KH12PP
Race Type
Plain
Alkuperämaa
Germany
Tuotetiedot
Linear Ball Bearings
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.
The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.
The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.
INA
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 21,10
kpl (ilman ALV)
€ 26,48
kpl (Sis ALV:n)
1
€ 21,10
kpl (ilman ALV)
€ 26,48
kpl (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 4 | € 21,10 |
| 5 - 9 | € 20,20 |
| 10 - 24 | € 19,10 |
| 25+ | € 18,70 |
Tekninen dokumentti
Tekniset tiedot
Merkki
INAInside Diameter
12mm
Outside Diameter
19mm
Race Width
28mm
Ball Bearing Type
Linear Ball Bearing
Sealing Arrangement
Both Sides Sealed
Bearing Clearance
CN
Material
Steel
Ball Material
Steel
Cage Material
Polyamide
Number of Rows
1
Static Load Rating
740N
Dynamic Load Rating
800N
Bore Type
Parallel
Partial Bearing Code
KH12PP
Race Type
Plain
Alkuperämaa
Germany
Tuotetiedot
Linear Ball Bearings
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.
The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.
The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.