IXYS MCMA265P1600KA, Dual Thyristor Module 1600V, 260A 220mA
Tekninen dokumentti
Tekniset tiedot
Thyristor Type
SCR Module
Peak On-State Voltage
1.46V
Maximum Gate Trigger Voltage
3V
Mounting Type
Panel Mount
Minimum Operating Temperature
-40 °C
Maximum Holding Current
150mA
Pin Count
7
Repetitive Peak Reverse Voltage
1600V
Repetitive Peak Forward Blocking Voltage
1600V
Maximum Gate Trigger Current
220mA
Maximum Operating Temperature
+140 °C
Surge Current Rating
9.18kA
Rated Average On-State Current
260A
Merkki
IXYSPackage Type
Case Y1
Dimensions
92 x 50 x 52mm
Alkuperämaa
Germany
Tuotetiedot
100/150W Power Supply, Switch mode, RACD100-A RACD150-A Series
The Recom RACD100-A and RACD150-A series of high power, dimmable, constant current LED drivers offer constant output currents of 1400mA or 700mA at voltages from 50V up to 142V (RACD100-A) and 1400mA, 1050mA or 700mA, with voltages from 60V up to 210V (RACD150-A). Both series of LED drivers support dimming via PWM or 1-10V signals and are fully IP67 sealed for outdoor as well as indoor applications. The constant current LED drivers have a wide input range of 90 to 305 Vac, the drivers operate with full load efficiency of more than 93%, they have active PFC with Power factor exceeding 0.98, they are also fully protected against short circuit, overload and over temperature conditions. The 2 series of LED drivers combine the market demands for high voltage outputs, dimming functions and compact sizes and are Green chip recognised for high efficiency, low THD and high power factor. Ideal applications of these constant current LED drivers are in high power area lighting, car parks, warehouses and security lighting.
Standards
UL8750
EN61347-2-13
Recom LED Drivers
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
- Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
- Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
- Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 244,00
1 kpl (3 kpl/laatikko) (ilman ALV)
€ 302,56
1 kpl (3 kpl/laatikko) (Sis ALV:n)
3
€ 244,00
1 kpl (3 kpl/laatikko) (ilman ALV)
€ 302,56
1 kpl (3 kpl/laatikko) (Sis ALV:n)
3
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
- Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
- Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
- Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Tekninen dokumentti
Tekniset tiedot
Thyristor Type
SCR Module
Peak On-State Voltage
1.46V
Maximum Gate Trigger Voltage
3V
Mounting Type
Panel Mount
Minimum Operating Temperature
-40 °C
Maximum Holding Current
150mA
Pin Count
7
Repetitive Peak Reverse Voltage
1600V
Repetitive Peak Forward Blocking Voltage
1600V
Maximum Gate Trigger Current
220mA
Maximum Operating Temperature
+140 °C
Surge Current Rating
9.18kA
Rated Average On-State Current
260A
Merkki
IXYSPackage Type
Case Y1
Dimensions
92 x 50 x 52mm
Alkuperämaa
Germany
Tuotetiedot
100/150W Power Supply, Switch mode, RACD100-A RACD150-A Series
The Recom RACD100-A and RACD150-A series of high power, dimmable, constant current LED drivers offer constant output currents of 1400mA or 700mA at voltages from 50V up to 142V (RACD100-A) and 1400mA, 1050mA or 700mA, with voltages from 60V up to 210V (RACD150-A). Both series of LED drivers support dimming via PWM or 1-10V signals and are fully IP67 sealed for outdoor as well as indoor applications. The constant current LED drivers have a wide input range of 90 to 305 Vac, the drivers operate with full load efficiency of more than 93%, they have active PFC with Power factor exceeding 0.98, they are also fully protected against short circuit, overload and over temperature conditions. The 2 series of LED drivers combine the market demands for high voltage outputs, dimming functions and compact sizes and are Green chip recognised for high efficiency, low THD and high power factor. Ideal applications of these constant current LED drivers are in high power area lighting, car parks, warehouses and security lighting.
Standards
UL8750
EN61347-2-13
Recom LED Drivers
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
- Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
- Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
- Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.