KEMET Ferrite Flat Cable Ferrite, Solid Core, Inner dims. 23.5 x 1.5mm
Tekninen dokumentti
Tekniset tiedot
Merkki
KEMETType
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
28 x 7 x 7.7mm
Inner Dimensions
23.5 x 1.5mm
Openable
No
Inner Height
1.5mm
Inner Width
23.5mm
Outer Depth
7mm
Outer Height
7.7mm
Outer Width
28mm
Tuotetiedot
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 0,861
kpl (toimitus laatikossa) (ilman ALV)
€ 1,081
kpl (toimitus laatikossa) (Sis ALV:n)
Tuotantopakkaus (Laatikko)
50
€ 0,861
kpl (toimitus laatikossa) (ilman ALV)
€ 1,081
kpl (toimitus laatikossa) (Sis ALV:n)
Tuotantopakkaus (Laatikko)
50
Osta irtotavarana
| Määrä | Yksikköhinta | Per Laatikko |
|---|---|---|
| 50 - 95 | € 0,861 | € 4,30 |
| 100 - 245 | € 0,809 | € 4,04 |
| 250 - 495 | € 0,738 | € 3,69 |
| 500+ | € 0,672 | € 3,36 |
Tekninen dokumentti
Tekniset tiedot
Merkki
KEMETType
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
28 x 7 x 7.7mm
Inner Dimensions
23.5 x 1.5mm
Openable
No
Inner Height
1.5mm
Inner Width
23.5mm
Outer Depth
7mm
Outer Height
7.7mm
Outer Width
28mm
Tuotetiedot
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.