Kopex Reducer, Conduit Fitting, 25mm Nominal Size, M25 → M20, Brass IP66 rating
Tekninen dokumentti
Tekniset tiedot
Merkki
KopexNominal Size
25mm
Fitting Type
Reducer
Thread Size
M25 → M20
Material
Brass
IP Rating
IP66
Series
EX/R
Alkuperämaa
United Kingdom
Tuotetiedot
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.
Kopex Ex-System
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 29,20
5 kpl:n pakkaus (ilman ALV)
€ 36,65
5 kpl:n pakkaus (Sis ALV:n)
1
€ 29,20
5 kpl:n pakkaus (ilman ALV)
€ 36,65
5 kpl:n pakkaus (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 9 | € 29,20 |
| 10 - 49 | € 27,80 |
| 50+ | € 26,30 |
Tekninen dokumentti
Tekniset tiedot
Merkki
KopexNominal Size
25mm
Fitting Type
Reducer
Thread Size
M25 → M20
Material
Brass
IP Rating
IP66
Series
EX/R
Alkuperämaa
United Kingdom
Tuotetiedot
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.