Tekninen dokumentti
Tekniset tiedot
Merkki
LegrisConnector A
G 1/2 Female
Connector B
Push In 12 mm
Pneumatic Fitting Type
Bulkhead Threaded-to-Tube Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
G 1/2 Female
Manufacturer Series
LF3000
Thread Material
Brass
Body Material
Brass
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Threaded Connection A
G 1/2 Female
Tuotetiedot
Bulkhead Adaptor - Parallel Thread-to-Tube
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
These fitting connect tubing with a male thread through the installation panel and provide an excellent seal between the panel and fitting.
Bulkhead Adaptors and Manifolds
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 22,20
1 kpl (2 kpl/pakkaus) (ilman ALV)
€ 27,528
1 kpl (2 kpl/pakkaus) (Sis ALV:n)
2
€ 22,20
1 kpl (2 kpl/pakkaus) (ilman ALV)
€ 27,528
1 kpl (2 kpl/pakkaus) (Sis ALV:n)
2
Osta irtotavarana
Määrä | Yksikköhinta | Per Pakkaus |
---|---|---|
2 - 8 | € 22,20 | € 44,40 |
10 - 18 | € 21,50 | € 43,00 |
20+ | € 20,00 | € 40,00 |
Tekninen dokumentti
Tekniset tiedot
Merkki
LegrisConnector A
G 1/2 Female
Connector B
Push In 12 mm
Pneumatic Fitting Type
Bulkhead Threaded-to-Tube Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
G 1/2 Female
Manufacturer Series
LF3000
Thread Material
Brass
Body Material
Brass
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Threaded Connection A
G 1/2 Female
Tuotetiedot
Bulkhead Adaptor - Parallel Thread-to-Tube
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
These fitting connect tubing with a male thread through the installation panel and provide an excellent seal between the panel and fitting.