Tekninen dokumentti
Tekniset tiedot
Merkki
LumbergSeries
Minimodul
Pitch
2.5mm
Number Of Contacts
8
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Mounting Type
Through Hole
Termination Method
Solder
Contact Plating
Tin
Contact Material
Brass
Current Rating
5.0A
Voltage Rating
160.0 V
Tuotetiedot
Minimodul Horizontal Headers
These Lumberg Minimodul™ horizontal pin headers mate with crimp contact housings (3114 Series), see stock number 737-8482 typical, for indirect mating of wire to board connections.
2.5mm Wire to Board - Lumberg Minimodul Series
These Lumberg Minimodul Connectors are for cable-to-board connections. The Minimodul Series connectors provide easy harnessing of single leads and flat cables with established crimp technology and are especially suitable for low and middle-volume production. The design of the Minimodul Series connectors is suitable for signal and low load currents up to 5 A. Pitch 2.50 mm (.098").
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 0,855
1 kpl (10 kpl/pakkaus) (ilman ALV)
€ 1,06
1 kpl (10 kpl/pakkaus) (Sis ALV:n)
10
€ 0,855
1 kpl (10 kpl/pakkaus) (ilman ALV)
€ 1,06
1 kpl (10 kpl/pakkaus) (Sis ALV:n)
10
Osta irtotavarana
Määrä | Yksikköhinta | Per Pakkaus |
---|---|---|
10 - 40 | € 0,855 | € 8,55 |
50+ | € 0,787 | € 7,87 |
Tekninen dokumentti
Tekniset tiedot
Merkki
LumbergSeries
Minimodul
Pitch
2.5mm
Number Of Contacts
8
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Mounting Type
Through Hole
Termination Method
Solder
Contact Plating
Tin
Contact Material
Brass
Current Rating
5.0A
Voltage Rating
160.0 V
Tuotetiedot
Minimodul Horizontal Headers
These Lumberg Minimodul™ horizontal pin headers mate with crimp contact housings (3114 Series), see stock number 737-8482 typical, for indirect mating of wire to board connections.
2.5mm Wire to Board - Lumberg Minimodul Series
These Lumberg Minimodul Connectors are for cable-to-board connections. The Minimodul Series connectors provide easy harnessing of single leads and flat cables with established crimp technology and are especially suitable for low and middle-volume production. The design of the Minimodul Series connectors is suitable for signal and low load currents up to 5 A. Pitch 2.50 mm (.098").