Megger RCDT320-FR RCD Tester, Loop Impedance Test Type 3 Wire 300V ac, RCD Test Type DC, RCD Test Current 1000 mA CAT
Technical Document
Specifications
Brand
MeggerTest Equipment Type
RCD Tester
Product Type
RCD Tester
Loop Impedance Test Type
3 Wire
Maximum Voltage Measurement
300V ac
RCD Test Type
DC
RCD Test Current
1000mA
Display Type
LCD
Minimum Operating Temperature
-5°C
Battery Type
AA
Maximum Operating Temperature
40°C
Power Source
Battery
Width
148 mm
Height
78mm
Length
203mm
Weight
980g
Standards/Approvals
IEC 61326-1
Plug Type
3-Pin (Global)
Safety Category Level
CAT III
Safety Category Voltage
300V
Country of Origin
United Kingdom
Product details
RCDT320 differential circuit breaker tester
Differential circuit breaker tester that meets the requirements of NFC 15-100, EN6557-3 and IEC 61010 for testing low-voltage electrical wiring.
0 ° or 180 ° polarity selection.
Selectable touch voltage and display on the analogue arc.
300 Vac voltage measurement range.
3-phase safe (the device will remain safe, even if it is connected across phases).
Mains voltage measurement.
Large digital display with a true analogue response.
The rigid display cover folds out of the way during testing and locks down to protect the display when finished.
Test locking - prevents testing when mains voltage exceeds 300 V.
Supplied with a 3-wire test lead set fitted with crocodile clips, a mains plug test lead, 8 x AA rechargeable alkaline batteries and a hard carry case.
Sealing: IP54.
IEC 61010-1 compliant for safe use at 440 V on installations classified as Cat. III 600 V or Cat. IV 300 V.
Stock information temporarily unavailable.
€ 810.00
€ 810.00 Each (Exc. Vat)
€ 1,016.55
€ 1,016.55 Each (inc. VAT)
1
€ 810.00
€ 810.00 Each (Exc. Vat)
€ 1,016.55
€ 1,016.55 Each (inc. VAT)
Stock information temporarily unavailable.
1
Technical Document
Specifications
Brand
MeggerTest Equipment Type
RCD Tester
Product Type
RCD Tester
Loop Impedance Test Type
3 Wire
Maximum Voltage Measurement
300V ac
RCD Test Type
DC
RCD Test Current
1000mA
Display Type
LCD
Minimum Operating Temperature
-5°C
Battery Type
AA
Maximum Operating Temperature
40°C
Power Source
Battery
Width
148 mm
Height
78mm
Length
203mm
Weight
980g
Standards/Approvals
IEC 61326-1
Plug Type
3-Pin (Global)
Safety Category Level
CAT III
Safety Category Voltage
300V
Country of Origin
United Kingdom
Product details
RCDT320 differential circuit breaker tester
Differential circuit breaker tester that meets the requirements of NFC 15-100, EN6557-3 and IEC 61010 for testing low-voltage electrical wiring.
0 ° or 180 ° polarity selection.
Selectable touch voltage and display on the analogue arc.
300 Vac voltage measurement range.
3-phase safe (the device will remain safe, even if it is connected across phases).
Mains voltage measurement.
Large digital display with a true analogue response.
The rigid display cover folds out of the way during testing and locks down to protect the display when finished.
Test locking - prevents testing when mains voltage exceeds 300 V.
Supplied with a 3-wire test lead set fitted with crocodile clips, a mains plug test lead, 8 x AA rechargeable alkaline batteries and a hard carry case.
Sealing: IP54.
IEC 61010-1 compliant for safe use at 440 V on installations classified as Cat. III 600 V or Cat. IV 300 V.