Microchip PICtail Plus RN1810 WiFi Daughter Board for Explorer 16, Explorer 8 RN-1810-PICTAIL
Tekninen dokumentti
Tekniset tiedot
Merkki
MicrochipRF Technology
WiFi
Kit Classification
Daughter Board
For Use With
Explorer 16, Explorer 8
Featured Device
RN1810
Kit Name
PICtail Plus
Tuotetiedot
RN1810 WiFi PICtail Plus Daughter Board
The Microchip RN1810 PICtail/PICtail Plus Daughter Board is a flexible platform to develop the RN1810 2.4 GHz 802.11b/g/n WiFi module. Through its PICtail connector, the board can be used to add the RN1810 to compatible Microchip development platforms such as the Explorer boards. It can also be used standalone via a USB interface.
The featured RN1810 is a low-power 2.4 GHz 802.11b/g/n WiFi Module that combines all the necessary circuitry into a ready certified surface mount solution. The RN1810 integrates a TCP/IP networking stack, cryptographic accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver and RF power amplifier. The integrated design provides a certified solution that removes the hurdle of RF design regulatory and compliance testing. Also the RN1810 is simple to program as only simple ASCII command language is required. The simplest configuration of the RN1810 requires only power, ground and UART Tx and Rx connections.
WLAN (Wireless Local Area Network) - Microchip Technology
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 25,80
kpl (ilman ALV)
€ 31,99
kpl (Sis ALV:n)
1
€ 25,80
kpl (ilman ALV)
€ 31,99
kpl (Sis ALV:n)
1
Tekninen dokumentti
Tekniset tiedot
Merkki
MicrochipRF Technology
WiFi
Kit Classification
Daughter Board
For Use With
Explorer 16, Explorer 8
Featured Device
RN1810
Kit Name
PICtail Plus
Tuotetiedot
RN1810 WiFi PICtail Plus Daughter Board
The Microchip RN1810 PICtail/PICtail Plus Daughter Board is a flexible platform to develop the RN1810 2.4 GHz 802.11b/g/n WiFi module. Through its PICtail connector, the board can be used to add the RN1810 to compatible Microchip development platforms such as the Explorer boards. It can also be used standalone via a USB interface.
The featured RN1810 is a low-power 2.4 GHz 802.11b/g/n WiFi Module that combines all the necessary circuitry into a ready certified surface mount solution. The RN1810 integrates a TCP/IP networking stack, cryptographic accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver and RF power amplifier. The integrated design provides a certified solution that removes the hurdle of RF design regulatory and compliance testing. Also the RN1810 is simple to program as only simple ASCII command language is required. The simplest configuration of the RN1810 requires only power, ground and UART Tx and Rx connections.