Molex, LFH Series Blank For Use With DMS-59 Plug Sub Assembly, LFH Plug Sub Assembly
Tekninen dokumentti
Tuotetiedot
Molex LFH Terminal Sticks, 70984 Series
These Molex Low Force Helix (LFH) Matrix 50 Terminal Sticks are sold separately and 4 are required per assembly. Use with 70929 Series Subassembly stock number 720-6612 .
Molex Low Force Helix (LFH) Range
The Molex Low Force Helix (LFH) contact system is designed for high-pin count, high speed signal requirements for both cable-to-board and board-to-board applications. The low insertion forces make the LFH system an ideal solution where multiple single lines need to be terminated or packaged into a limited space. The LFH Matrix 50 system contact layout is four rows on 1.27 by 1.27mm (.050 by .050") spacing and features I/O shielding and support both vertical and right angle board mounting. Termination is achieved by the wires being welded or soldered directly to the Terminals Sticks.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 3,90
kpl (toimitus pussissa) (ilman ALV)
€ 4,836
kpl (toimitus pussissa) (Sis ALV:n)
5
€ 3,90
kpl (toimitus pussissa) (ilman ALV)
€ 4,836
kpl (toimitus pussissa) (Sis ALV:n)
5
Osta irtotavarana
| Määrä | Yksikköhinta | Per Pussi |
|---|---|---|
| 5 - 120 | € 3,90 | € 19,50 |
| 125 - 370 | € 3,00 | € 15,00 |
| 375 - 995 | € 2,55 | € 12,75 |
| 1000 - 1995 | € 2,35 | € 11,75 |
| 2000+ | € 2,25 | € 11,25 |
Tekninen dokumentti
Tuotetiedot
Molex LFH Terminal Sticks, 70984 Series
These Molex Low Force Helix (LFH) Matrix 50 Terminal Sticks are sold separately and 4 are required per assembly. Use with 70929 Series Subassembly stock number 720-6612 .
Molex Low Force Helix (LFH) Range
The Molex Low Force Helix (LFH) contact system is designed for high-pin count, high speed signal requirements for both cable-to-board and board-to-board applications. The low insertion forces make the LFH system an ideal solution where multiple single lines need to be terminated or packaged into a limited space. The LFH Matrix 50 system contact layout is four rows on 1.27 by 1.27mm (.050 by .050") spacing and features I/O shielding and support both vertical and right angle board mounting. Termination is achieved by the wires being welded or soldered directly to the Terminals Sticks.