Murata 120 mA Common Mode Choke 1.4Ω
Tekninen dokumentti
Tekniset tiedot
Merkki
MurataSeries
DLP2AD
Impedance
90 Ω
Test Frequency
100 MHz
DC Resistance
1.4Ω
Maximum Current
120 mA
Dimensions
2 x 1 x 0.82mm
Operating Temperature Range
-40°C → +85°C
Number of Lines
4
Mounting Type
Surface Mount
Termination Style
Solder Pad
Package/Case
2010 (5025M)
Minimum Operating Temperature
-40°C
Length
2mm
Height
0.82mm
Maximum Operating Temperature
+85°C
Depth
1mm
Alkuperämaa
Japan
Tuotetiedot
Murata 0804 DLP2ADA Series Common Mode Choke Coil Arrays
DLP2ADA common mode chokes from Murata are a compact, low profile solution. With a height of only 0.82 mm, these common mode chokes are constructed from two 2.0 x 1.00 mm size components and ideal for mobile equipment. The tight terminal pitch enables high mounting density, while the ability to match line impedance ensure a good transmission of high-speed signals.
Murata SMD Common Mode Chokes
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 0,403
1 kpl (10 kpl/pakkaus) (ilman ALV)
€ 0,50
1 kpl (10 kpl/pakkaus) (Sis ALV:n)
10
€ 0,403
1 kpl (10 kpl/pakkaus) (ilman ALV)
€ 0,50
1 kpl (10 kpl/pakkaus) (Sis ALV:n)
10
Osta irtotavarana
| Määrä | Yksikköhinta | Per Pakkaus |
|---|---|---|
| 10 - 40 | € 0,403 | € 4,03 |
| 50 - 90 | € 0,342 | € 3,42 |
| 100 - 240 | € 0,303 | € 3,03 |
| 250 - 990 | € 0,263 | € 2,63 |
| 1000+ | € 0,242 | € 2,42 |
Tekninen dokumentti
Tekniset tiedot
Merkki
MurataSeries
DLP2AD
Impedance
90 Ω
Test Frequency
100 MHz
DC Resistance
1.4Ω
Maximum Current
120 mA
Dimensions
2 x 1 x 0.82mm
Operating Temperature Range
-40°C → +85°C
Number of Lines
4
Mounting Type
Surface Mount
Termination Style
Solder Pad
Package/Case
2010 (5025M)
Minimum Operating Temperature
-40°C
Length
2mm
Height
0.82mm
Maximum Operating Temperature
+85°C
Depth
1mm
Alkuperämaa
Japan
Tuotetiedot
Murata 0804 DLP2ADA Series Common Mode Choke Coil Arrays
DLP2ADA common mode chokes from Murata are a compact, low profile solution. With a height of only 0.82 mm, these common mode chokes are constructed from two 2.0 x 1.00 mm size components and ideal for mobile equipment. The tight terminal pitch enables high mounting density, while the ability to match line impedance ensure a good transmission of high-speed signals.