Nuvotem Talema 230V ac, 2 x 40V ac Toroidal Transformer, 800VA 2 Output
Tekninen dokumentti
Tekniset tiedot
Merkki
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 40V ac
Power Rating
800VA
Number of Outputs
2
Secondary Current
10A
Height
60mm
Weight
5.1kg
Diameter
162mm
Dimensions
162 (Dia.) x 60mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Isolation Voltage
4.5kV ac
Minimum Temperature
0°C
Maximum Temperature
+120°C
Alkuperämaa
Czech Republic
Tuotetiedot
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 292,00
kpl (ilman ALV)
€ 366,46
kpl (Sis ALV:n)
1
€ 292,00
kpl (ilman ALV)
€ 366,46
kpl (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 9 | € 292,00 |
| 10 - 24 | € 276,00 |
| 25 - 49 | € 247,00 |
| 50 - 74 | € 218,00 |
| 75+ | € 189,00 |
Tekninen dokumentti
Tekniset tiedot
Merkki
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 40V ac
Power Rating
800VA
Number of Outputs
2
Secondary Current
10A
Height
60mm
Weight
5.1kg
Diameter
162mm
Dimensions
162 (Dia.) x 60mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Isolation Voltage
4.5kV ac
Minimum Temperature
0°C
Maximum Temperature
+120°C
Alkuperämaa
Czech Republic
Tuotetiedot
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558