Tekninen dokumentti
Tekniset tiedot
Merkki
OptekPeak Sensor Distance
6.35mm
Output Device
Phototransistor
Number of Channels
1
Number of Pins
4
Mounting Type
Screw Mount
Dimensions
29.59 x 7.62 x 13.34mm
Height
13.34mm
Length
29.59mm
Maximum Operating Temperature
+85°C
Minimum Operating Temperature
-40°C
Width
7.62mm
Operating Temperature Range
-40 → +85°C
Alkuperämaa
Mexico
Tuotetiedot
Tube Liquid Sensor
The OPB350 series liquid sensor is designed to work with 3.2mm (1/8 inch) and 6.3mm (1/4 inch) outside diameter clear tubes. Used in conjunction with suitably designed output reference circuitry, output states such as "fluid present", "no fluid present" and "no tube present" can be recognised. Clear liquid present causes the phototransistor to sink the maximum current, while dark liquid present causes it to sink the minimum current. As bubbles pass through the tube, the signal will vary between the liquid present and no liquid states. If no liquid is present, the phototransistor sinks only a small amount of current. If no tube is present, the phototransistor sinks a larger current than in the no liquid state.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 10,90
1 kpl (25 kpl/pussi) (ilman ALV)
€ 13,516
1 kpl (25 kpl/pussi) (Sis ALV:n)
25
€ 10,90
1 kpl (25 kpl/pussi) (ilman ALV)
€ 13,516
1 kpl (25 kpl/pussi) (Sis ALV:n)
25
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
- Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
- Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
- Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Tekninen dokumentti
Tekniset tiedot
Merkki
OptekPeak Sensor Distance
6.35mm
Output Device
Phototransistor
Number of Channels
1
Number of Pins
4
Mounting Type
Screw Mount
Dimensions
29.59 x 7.62 x 13.34mm
Height
13.34mm
Length
29.59mm
Maximum Operating Temperature
+85°C
Minimum Operating Temperature
-40°C
Width
7.62mm
Operating Temperature Range
-40 → +85°C
Alkuperämaa
Mexico
Tuotetiedot
Tube Liquid Sensor
The OPB350 series liquid sensor is designed to work with 3.2mm (1/8 inch) and 6.3mm (1/4 inch) outside diameter clear tubes. Used in conjunction with suitably designed output reference circuitry, output states such as "fluid present", "no fluid present" and "no tube present" can be recognised. Clear liquid present causes the phototransistor to sink the maximum current, while dark liquid present causes it to sink the minimum current. As bubbles pass through the tube, the signal will vary between the liquid present and no liquid states. If no liquid is present, the phototransistor sinks only a small amount of current. If no tube is present, the phototransistor sinks a larger current than in the no liquid state.