Parker Hydraulic Blanking Plug G 3/8, VSTI3/8EDCF
Tekninen dokumentti
Tekniset tiedot
Merkki
ParkerConnector A
G 3/8
Connector A - Thread Size
3/8in
Hydraulic Fitting Type
Hydraulic Blanking Plug
Material
Steel
Connector A - Thread Standard
G
Connector A - Gender
Male
Maximum Operating Pressure
400bar
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+100°C
Tuotetiedot
Blanking Plug
Blanking plugs for ports, male metric thread. Manufactured from steel to BS5200 with a zinc chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to +120°C for plugs).
Warning
Hydraulic systems can work at high pressures, and fittings and adaptors can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. When choosing fittings or adaptors careful attention should be given to the technical specifications.
€ 25,50
€ 5,10 1 kpl (5 kpl/pakkaus) (ilman ALV)
€ 32,00
€ 6,40 1 kpl (5 kpl/pakkaus) (Sis ALV:n)
5
€ 25,50
€ 5,10 1 kpl (5 kpl/pakkaus) (ilman ALV)
€ 32,00
€ 6,40 1 kpl (5 kpl/pakkaus) (Sis ALV:n)
5
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
Tekninen dokumentti
Tekniset tiedot
Merkki
ParkerConnector A
G 3/8
Connector A - Thread Size
3/8in
Hydraulic Fitting Type
Hydraulic Blanking Plug
Material
Steel
Connector A - Thread Standard
G
Connector A - Gender
Male
Maximum Operating Pressure
400bar
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+100°C
Tuotetiedot
Blanking Plug
Blanking plugs for ports, male metric thread. Manufactured from steel to BS5200 with a zinc chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to +120°C for plugs).
Warning
Hydraulic systems can work at high pressures, and fittings and adaptors can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. When choosing fittings or adaptors careful attention should be given to the technical specifications.