Phoenix Contact3031380 ST 4-PE Series Earth Terminal Block, 0.08 → 6mm², Single-Level, Spring Cage Termination
Tekninen dokumentti
Tekniset tiedot
Merkki
Phoenix ContactColour
Green/Yellow
Number of Levels
Single
Series
ST 4-PE
American Wire Gauge
28 → 10AWG
Termination Method
Spring Cage
Cable CSA
0.08 → 6mm²
Voltage Rating
800 V
Current Rating
52A
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+70°C
Standards Met
CSA, cULus, VDE
Model Number
ST 4-PE
Alkuperämaa
Germany
Tuotetiedot
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 23,50
€ 4,70 1 kpl (5 kpl/pakkaus) (ilman ALV)
€ 29,49
€ 5,898 1 kpl (5 kpl/pakkaus) (Sis ALV:n)
5
€ 23,50
€ 4,70 1 kpl (5 kpl/pakkaus) (ilman ALV)
€ 29,49
€ 5,898 1 kpl (5 kpl/pakkaus) (Sis ALV:n)
5
Tekninen dokumentti
Tekniset tiedot
Merkki
Phoenix ContactColour
Green/Yellow
Number of Levels
Single
Series
ST 4-PE
American Wire Gauge
28 → 10AWG
Termination Method
Spring Cage
Cable CSA
0.08 → 6mm²
Voltage Rating
800 V
Current Rating
52A
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+70°C
Standards Met
CSA, cULus, VDE
Model Number
ST 4-PE
Alkuperämaa
Germany
Tuotetiedot
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².