Phoenix Contact 3036372 ST 4-FSI/C Series Black, 0.08 → 4mm², Single-Level, Spring Clamp Termination, Fused
Tekninen dokumentti
Tekniset tiedot
Merkki
Phoenix ContactColour
Black
Number of Levels
Single
American Wire Gauge
28 → 10AWG
Series
ST 4-FSI/C
Termination Method
Spring Clamp
Cable CSA
0.08 → 4mm²
Fused
Yes
Voltage Rating
400 V
Current Rating
30A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
EAC
Model Number
ST 4-FSI/C
Distrelec Product Id
30012533
Alkuperämaa
Turkey
Tuotetiedot
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
€ 7,40
€ 7,40 kpl (ilman ALV)
€ 9,29
€ 9,29 kpl (Sis ALV:n)
1
€ 7,40
€ 7,40 kpl (ilman ALV)
€ 9,29
€ 9,29 kpl (Sis ALV:n)
1
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
Tekninen dokumentti
Tekniset tiedot
Merkki
Phoenix ContactColour
Black
Number of Levels
Single
American Wire Gauge
28 → 10AWG
Series
ST 4-FSI/C
Termination Method
Spring Clamp
Cable CSA
0.08 → 4mm²
Fused
Yes
Voltage Rating
400 V
Current Rating
30A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
EAC
Model Number
ST 4-FSI/C
Distrelec Product Id
30012533
Alkuperämaa
Turkey
Tuotetiedot
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².