ESD Continuous Monitor 5V
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProTerminal Type
Banana
Supply Voltage
5V
Height
30mm
Number of Operators
1
Length
61mm
Number of Worksurfaces
1
Width
69mm
Supervisor Monitoring
Yes
Parking Station
No
Charge Detection
No
EOS Detection
Yes
Complies with EN 61340-5-1
Yes
Alkuperämaa
United States
Tuotetiedot
RS Pro Body Voltage Monitor
The RS Body Voltage Monitor is a single station continuous monitor for one operator, one ESD work surface and one tool ground. A second monitored jack is featured for use by a supervisor or second operator.
The Body Voltage Monitor uses Dual-Channel Voltage Monitoring Technology for true continuous monitoring (versus pulsed or intermittent). The Dual-Channel Voltage Monitoring Technology uses one lead of the dual-wire wrist strap (not included) to provide a path-to-ground for the operator while the other lead continuously monitors for voltage induced onto the operator greater than ±3 V dc. Voltage on the operator can be caused by strong AC fields in the work area or by other charge generators such as rolling a non-ESD safe chair.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 270,00
kpl (ilman ALV)
€ 334,80
kpl (Sis ALV:n)
1
€ 270,00
kpl (ilman ALV)
€ 334,80
kpl (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 4 | € 270,00 |
| 5 - 9 | € 265,00 |
| 10 - 39 | € 260,00 |
| 40+ | € 255,00 |
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProTerminal Type
Banana
Supply Voltage
5V
Height
30mm
Number of Operators
1
Length
61mm
Number of Worksurfaces
1
Width
69mm
Supervisor Monitoring
Yes
Parking Station
No
Charge Detection
No
EOS Detection
Yes
Complies with EN 61340-5-1
Yes
Alkuperämaa
United States
Tuotetiedot
RS Pro Body Voltage Monitor
The RS Body Voltage Monitor is a single station continuous monitor for one operator, one ESD work surface and one tool ground. A second monitored jack is featured for use by a supervisor or second operator.
The Body Voltage Monitor uses Dual-Channel Voltage Monitoring Technology for true continuous monitoring (versus pulsed or intermittent). The Dual-Channel Voltage Monitoring Technology uses one lead of the dual-wire wrist strap (not included) to provide a path-to-ground for the operator while the other lead continuously monitors for voltage induced onto the operator greater than ±3 V dc. Voltage on the operator can be caused by strong AC fields in the work area or by other charge generators such as rolling a non-ESD safe chair.