RS PRO Black Nylon Rod, 1m x 40mm Diameter
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProColour
Black
Length
1m
Material
Nylon
Form
Rod
Rod Diameter
40mm
Density
1.14g/cm³
Tensile Strength
75 MPa
Maximum Operating Temperature
+170°C
Flammability Rating
UL 94 HB
Elongation
25%
Water Absorption
7%
Alkuperämaa
Germany
Tuotetiedot
RS PRO Molybdenum Disulphide filled Nylon 66 Rod
A Nylon 66 rod optimised with a Molybdenum Disulphide for a low friction and self-lubricating engineering rod capable of handing high temperatures and high mechanical strength applications.
Nylon 66 is a high-performance thermoplastic with excellent mechanical properties. It has a high level of machineability, a high tensile strength, stiffness and a high level of heat resistance.
Unaffected by chlorinated hydrocarbons, impact resistant with a high abrasion and ultraviolet resistance the Nylon 66 rods are ideal for a wide range of uses. These include higher stress applications such as the creation of bushes, friction bearings, gears, wheels, and machine parts.
Nylatron® / MoS2 Filled Nylon
These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 77,50
kpl (ilman ALV)
€ 96,10
kpl (Sis ALV:n)
1
€ 77,50
kpl (ilman ALV)
€ 96,10
kpl (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 2 | € 77,50 |
| 3 - 9 | € 72,00 |
| 10 - 29 | € 68,00 |
| 30+ | € 62,00 |
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProColour
Black
Length
1m
Material
Nylon
Form
Rod
Rod Diameter
40mm
Density
1.14g/cm³
Tensile Strength
75 MPa
Maximum Operating Temperature
+170°C
Flammability Rating
UL 94 HB
Elongation
25%
Water Absorption
7%
Alkuperämaa
Germany
Tuotetiedot
RS PRO Molybdenum Disulphide filled Nylon 66 Rod
A Nylon 66 rod optimised with a Molybdenum Disulphide for a low friction and self-lubricating engineering rod capable of handing high temperatures and high mechanical strength applications.
Nylon 66 is a high-performance thermoplastic with excellent mechanical properties. It has a high level of machineability, a high tensile strength, stiffness and a high level of heat resistance.
Unaffected by chlorinated hydrocarbons, impact resistant with a high abrasion and ultraviolet resistance the Nylon 66 rods are ideal for a wide range of uses. These include higher stress applications such as the creation of bushes, friction bearings, gears, wheels, and machine parts.
Nylatron® / MoS2 Filled Nylon
These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.