RS PRO E10 Indicator Light, Clear, 24 V, 116 mA, 3000h
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProVoltage Rating
24 V
Lamp Base
E10
Current Rating
116 mA
Diameter
11.5mm
Lamp Size
G3 1/2
Length
25 mm
Lens Colour
Clear
Luminosity
11 lm
Life Hours
3000h
Alkuperämaa
Korea, Republic Of
Tuotetiedot
G-3 (11mm) Round MES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 1,10
1 kpl (10 kpl/pakkaus) (ilman ALV)
€ 1,364
1 kpl (10 kpl/pakkaus) (Sis ALV:n)
10
€ 1,10
1 kpl (10 kpl/pakkaus) (ilman ALV)
€ 1,364
1 kpl (10 kpl/pakkaus) (Sis ALV:n)
10
Osta irtotavarana
| Määrä | Yksikköhinta | Per Pakkaus |
|---|---|---|
| 10 - 90 | € 1,10 | € 11,00 |
| 100 - 490 | € 0,991 | € 9,91 |
| 500 - 990 | € 0,826 | € 8,26 |
| 1000+ | € 0,772 | € 7,72 |
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProVoltage Rating
24 V
Lamp Base
E10
Current Rating
116 mA
Diameter
11.5mm
Lamp Size
G3 1/2
Length
25 mm
Lens Colour
Clear
Luminosity
11 lm
Life Hours
3000h
Alkuperämaa
Korea, Republic Of
Tuotetiedot
G-3 (11mm) Round MES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.