Schurter Panel Mount Fuse Holder for 5 x 20mm Fuse, 500V ac
Tekninen dokumentti
Tekniset tiedot
Merkki
SchurterFuse Size
5 x 20mm
Voltage Rating
500V ac
Cap Style
Slotted
Series
FEC Series
Compatible Fuse Diameter
5mm
Compatible Fuse Length
20mm
International Protection Rating
IP40
Tuotetiedot
Schurter FEC Series
Schurter FEC series panel mount fuse holders for 5 x 20 or 6.3 x 32 mm cartridge fuses. The FEC series have quick connect terminals and area available with a finger grip or slotted cap.
Panel Mounting
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 7,00
kpl (ilman ALV)
€ 8,68
kpl (Sis ALV:n)
1
€ 7,00
kpl (ilman ALV)
€ 8,68
kpl (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 24 | € 7,00 |
| 25 - 49 | € 6,50 |
| 50+ | € 6,00 |
Tekninen dokumentti
Tekniset tiedot
Merkki
SchurterFuse Size
5 x 20mm
Voltage Rating
500V ac
Cap Style
Slotted
Series
FEC Series
Compatible Fuse Diameter
5mm
Compatible Fuse Length
20mm
International Protection Rating
IP40
Tuotetiedot
Schurter FEC Series
Schurter FEC series panel mount fuse holders for 5 x 20 or 6.3 x 32 mm cartridge fuses. The FEC series have quick connect terminals and area available with a finger grip or slotted cap.
Panel Mounting
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.