Sensata / Crydom Solid State Contactor, 3NO
Tekninen dokumentti
Tekniset tiedot
Merkki
Sensata / CrydomNormal State Configuration
3NO
Terminal Type
Screw
Length
45.31mm
Width
86.71mm
Depth
96.02mm
Load Current
4.8A
Pole and Throw Configuration
3P
Mounting Style
DIN Rail Mount
Control Voltage
90 V ac → 140 V ac
Maximum Operating Temperature
+80°C
Load Voltage
48 V ac → 510V ac
Minimum Operating Temperature
-30°C
Input Current
7.5 mA → 13mA
Alkuperämaa
Mexico
Tuotetiedot
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 106,40
kpl (ilman ALV)
€ 131,94
kpl (Sis ALV:n)
1
€ 106,40
kpl (ilman ALV)
€ 131,94
kpl (Sis ALV:n)
1
Tekninen dokumentti
Tekniset tiedot
Merkki
Sensata / CrydomNormal State Configuration
3NO
Terminal Type
Screw
Length
45.31mm
Width
86.71mm
Depth
96.02mm
Load Current
4.8A
Pole and Throw Configuration
3P
Mounting Style
DIN Rail Mount
Control Voltage
90 V ac → 140 V ac
Maximum Operating Temperature
+80°C
Load Voltage
48 V ac → 510V ac
Minimum Operating Temperature
-30°C
Input Current
7.5 mA → 13mA
Alkuperämaa
Mexico
Tuotetiedot
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.