Sensata Crydom Solid State Relay, 7.6 A Load, DIN Rail Mount, 510 V ac Load
Tekninen dokumentti
Tekniset tiedot
Merkki
Sensata / CrydomMaximum Load Current
7.6 A
Mounting Type
DIN Rail Mount
Maximum Load Voltage
510 V ac
Minimum Load Voltage
48 V ac
Control Voltage Range
90 V ac → 140 V ac
Number of Poles
3
Terminal Type
Screw
Load Voltage Range
48 V ac → 510V ac
Height
86.71mm
Length
45.31mm
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+80°C
Depth
96.02mm
Alkuperämaa
Mexico
Tuotetiedot
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
€ 99,00
€ 99,00 kpl (ilman ALV)
€ 124,24
€ 124,24 kpl (Sis ALV:n)
1
€ 99,00
€ 99,00 kpl (ilman ALV)
€ 124,24
€ 124,24 kpl (Sis ALV:n)
1
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
Tekninen dokumentti
Tekniset tiedot
Merkki
Sensata / CrydomMaximum Load Current
7.6 A
Mounting Type
DIN Rail Mount
Maximum Load Voltage
510 V ac
Minimum Load Voltage
48 V ac
Control Voltage Range
90 V ac → 140 V ac
Number of Poles
3
Terminal Type
Screw
Load Voltage Range
48 V ac → 510V ac
Height
86.71mm
Length
45.31mm
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+80°C
Depth
96.02mm
Alkuperämaa
Mexico
Tuotetiedot
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors