Tekninen dokumentti
Tekniset tiedot
Merkki
SensirionMedia Monitored
Liquid
Device Type
Liquid Flow Switch
Minimum Flow Rate
250 (Isopropyl Alcohol)
Maximum Flow Rate
250 (Isopropyl Alcohol) mL/min, 50 (Water) mL/min
Supply Voltage
5 → 12 V
Pipe Diameter Range
9.2 mm
Connection Type
5 Pin PCB Header
Maximum Pressure
3bar
Material
Borosilicate Glass (Tube Material), FEP (Sealing), PEEk (Fitting)
Minimum Operating Temperature
+10°C
Maximum Operating Temperature
+50°C
Current Rating
6.8 mA
Alkuperämaa
Switzerland
Tuotetiedot
LG01-2000A Liquid Flow Switch & Bubble Detectors
The LG01-2000A family of liquid flow switches from Sensirion are able to detect liquid flow by millilitres per minute (ml/min). It also provides bubble detection.
When the flow rate is more than the desired flow switch point, the output signal is 5 V. If the flow rate is lower than this point the output signal is 0 V. This is also the case for when air/bubbles are sensed within the sensors flow channel.
This non-invasive liquid flow switch has a straight glass capillary flow path. This also enables chemical resistance and bio-compatibility.
An additional Connectivity Kit can be purchased separately for the LG01 liquid flow switches.
Sensirion Liquid Flow Switches
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 112,00
Each (In a Tray of 25) (ilman ALV)
€ 138,88
Each (In a Tray of 25) (Sis ALV:n)
25
€ 112,00
Each (In a Tray of 25) (ilman ALV)
€ 138,88
Each (In a Tray of 25) (Sis ALV:n)
25
Tekninen dokumentti
Tekniset tiedot
Merkki
SensirionMedia Monitored
Liquid
Device Type
Liquid Flow Switch
Minimum Flow Rate
250 (Isopropyl Alcohol)
Maximum Flow Rate
250 (Isopropyl Alcohol) mL/min, 50 (Water) mL/min
Supply Voltage
5 → 12 V
Pipe Diameter Range
9.2 mm
Connection Type
5 Pin PCB Header
Maximum Pressure
3bar
Material
Borosilicate Glass (Tube Material), FEP (Sealing), PEEk (Fitting)
Minimum Operating Temperature
+10°C
Maximum Operating Temperature
+50°C
Current Rating
6.8 mA
Alkuperämaa
Switzerland
Tuotetiedot
LG01-2000A Liquid Flow Switch & Bubble Detectors
The LG01-2000A family of liquid flow switches from Sensirion are able to detect liquid flow by millilitres per minute (ml/min). It also provides bubble detection.
When the flow rate is more than the desired flow switch point, the output signal is 5 V. If the flow rate is lower than this point the output signal is 0 V. This is also the case for when air/bubbles are sensed within the sensors flow channel.
This non-invasive liquid flow switch has a straight glass capillary flow path. This also enables chemical resistance and bio-compatibility.
An additional Connectivity Kit can be purchased separately for the LG01 liquid flow switches.