TE Connectivity, DuraSeal Insulated Ring Terminal, M4 Stud Size, 1.5mm² to 2.5mm² Wire Size, Blue
Tekninen dokumentti
Tekniset tiedot
Merkki
TE ConnectivitySeries
Duraseal
Insulation
Insulated
Insulation Material
Nylon
Minimum Wire Size mm²
1.5mm²
Maximum Wire Size mm²
2.5mm²
Minimum Wire Size AWG
16AWG
Maximum Wire Size AWG
14AWG
Stud Size
M4
Colour
Blue
Contact Plating
Tin
Contact Material
Copper
Overall Length
33.02mm
Alkuperämaa
Mexico
Tuotetiedot
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 36,10
25 kpl laatikko (ilman ALV)
€ 45,31
25 kpl laatikko (Sis ALV:n)
1
€ 36,10
25 kpl laatikko (ilman ALV)
€ 45,31
25 kpl laatikko (Sis ALV:n)
1
Tekninen dokumentti
Tekniset tiedot
Merkki
TE ConnectivitySeries
Duraseal
Insulation
Insulated
Insulation Material
Nylon
Minimum Wire Size mm²
1.5mm²
Maximum Wire Size mm²
2.5mm²
Minimum Wire Size AWG
16AWG
Maximum Wire Size AWG
14AWG
Stud Size
M4
Colour
Blue
Contact Plating
Tin
Contact Material
Copper
Overall Length
33.02mm
Alkuperämaa
Mexico
Tuotetiedot
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed