TE Connectivity Transparent Polyolefin Solder Sleeve 24.5mm Length 1 → 3mm Cable Diameter
Tekninen dokumentti
Tekniset tiedot
Merkki
TE ConnectivityMinimum Cable Diameter
1mm
Maximum Cable Diameter
3mm
Sleeve Length
24.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Transparent
Series
B-155
Shrink Temperature
+85°C
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Alkuperämaa
Mexico
Tuotetiedot
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 0,927
1 kpl (100 kpl/pakkaus) (ilman ALV)
€ 1,163
1 kpl (100 kpl/pakkaus) (Sis ALV:n)
100
€ 0,927
1 kpl (100 kpl/pakkaus) (ilman ALV)
€ 1,163
1 kpl (100 kpl/pakkaus) (Sis ALV:n)
100
Osta irtotavarana
| Määrä | Yksikköhinta | Per Pakkaus |
|---|---|---|
| 100 - 1400 | € 0,927 | € 92,70 |
| 1500 - 4900 | € 0,881 | € 88,10 |
| 5000+ | € 0,833 | € 83,30 |
Tekninen dokumentti
Tekniset tiedot
Merkki
TE ConnectivityMinimum Cable Diameter
1mm
Maximum Cable Diameter
3mm
Sleeve Length
24.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Transparent
Series
B-155
Shrink Temperature
+85°C
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Alkuperämaa
Mexico
Tuotetiedot
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.