TE Connectivity Transparent Polyolefin Solder Sleeve 29.3mm Length 1.5 → 4.8mm Cable Diameter

RS tilauskoodi: 542-5707Tuotemerkki: TE ConnectivityValmistajan osanumero.: B-155-05
brand-logo
Näytä kaikki Solder Sleeves tuotteet

Tekninen dokumentti

Tekniset tiedot

Minimum Cable Diameter

1.5mm

Maximum Cable Diameter

4.8mm

Sleeve Length

29.3mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Quantity

1

Colour

Transparent

Alkuperämaa

Mexico

Tuotetiedot

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 0,78

1 kpl (100 kpl/pakkaus) (ilman ALV)

€ 0,967

1 kpl (100 kpl/pakkaus) (Sis ALV:n)

TE Connectivity Transparent Polyolefin Solder Sleeve 29.3mm Length 1.5 → 4.8mm Cable Diameter

€ 0,78

1 kpl (100 kpl/pakkaus) (ilman ALV)

€ 0,967

1 kpl (100 kpl/pakkaus) (Sis ALV:n)

TE Connectivity Transparent Polyolefin Solder Sleeve 29.3mm Length 1.5 → 4.8mm Cable Diameter
Varastotiedot eivät ole tilapäisesti saatavilla.

Osta irtotavarana

MääräYksikköhintaPer Pakkaus
100 - 1400€ 0,78€ 78,00
1500 - 4900€ 0,742€ 74,20
5000+€ 0,703€ 70,30

Tekninen dokumentti

Tekniset tiedot

Minimum Cable Diameter

1.5mm

Maximum Cable Diameter

4.8mm

Sleeve Length

29.3mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Quantity

1

Colour

Transparent

Alkuperämaa

Mexico

Tuotetiedot

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.