TE Connectivity Transparent Polyolefin Solder Sleeve 16mm Length 0.9 → 2mm Cable Diameter
Tekninen dokumentti
Tekniset tiedot
Merkki
TE ConnectivityMinimum Cable Diameter
0.9mm
Maximum Cable Diameter
2mm
Sleeve Length
16mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Colour
Transparent
Series
B-155
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Alkuperämaa
Mexico
Tuotetiedot
Wire Termination: Pin, Post & Tab
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 275,00
500 kpl laatikko (ilman ALV)
€ 341,00
500 kpl laatikko (Sis ALV:n)
1
€ 275,00
500 kpl laatikko (ilman ALV)
€ 341,00
500 kpl laatikko (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 14 | € 275,00 |
| 15 - 49 | € 261,00 |
| 50+ | € 247,00 |
Tekninen dokumentti
Tekniset tiedot
Merkki
TE ConnectivityMinimum Cable Diameter
0.9mm
Maximum Cable Diameter
2mm
Sleeve Length
16mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Colour
Transparent
Series
B-155
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Alkuperämaa
Mexico
Tuotetiedot
Wire Termination: Pin, Post & Tab
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.