TE Connectivity Butt Wire Splice Connector, Blue, Insulated 18 → 16 AWG

RS tilauskoodi: 173-4040Tuotemerkki: TE ConnectivityValmistajan osanumero.: D-436-37-COLD
brand-logo
Näytä kaikki Splice Connectors tuotteet

Tekninen dokumentti

Tekniset tiedot

Splice Type

Butt

Wire Size

18 → 16 AWG

Overall Length

38.7mm

Insulation

Insulated

Colour

Blue

Alkuperämaa

Mexico

Tuotetiedot

TE Connectivity Cold Applied In-Line Splices

Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are made from tin plated copper and the transparent polyvinylidene fluoride insulation sleeves have a colour coded end cap at either end. These cold applied in-line splices provide protection and sealing on all conventional MIL spec and commercial wire insulation systems.
Stock number 782-4755 is for use with a wire range of 26, 24, 22 and 20 AWG and has red colour coded caps at either end
Stock number 782-4768 is for use with a wire range of 18 to16 AWG and has blue colour coded caps at either end
Stock number 782-4759 is for use with a wire range of 14 to12 AWG and has yellow colour coded caps at either end

Standards

Meets or exceeds the following: SAE-AMS-DTL-23053/8 (Insulation sleeve), SAE-AS81824/12
Under qualification for SAE AS81824 and AS81824/12

Splices

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 12,90

1 kpl (100 kpl/pussi) (ilman ALV)

€ 15,996

1 kpl (100 kpl/pussi) (Sis ALV:n)

TE Connectivity Butt Wire Splice Connector, Blue, Insulated 18 → 16 AWG

€ 12,90

1 kpl (100 kpl/pussi) (ilman ALV)

€ 15,996

1 kpl (100 kpl/pussi) (Sis ALV:n)

TE Connectivity Butt Wire Splice Connector, Blue, Insulated 18 → 16 AWG
Varastotiedot eivät ole tilapäisesti saatavilla.

Tekninen dokumentti

Tekniset tiedot

Splice Type

Butt

Wire Size

18 → 16 AWG

Overall Length

38.7mm

Insulation

Insulated

Colour

Blue

Alkuperämaa

Mexico

Tuotetiedot

TE Connectivity Cold Applied In-Line Splices

Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are made from tin plated copper and the transparent polyvinylidene fluoride insulation sleeves have a colour coded end cap at either end. These cold applied in-line splices provide protection and sealing on all conventional MIL spec and commercial wire insulation systems.
Stock number 782-4755 is for use with a wire range of 26, 24, 22 and 20 AWG and has red colour coded caps at either end
Stock number 782-4768 is for use with a wire range of 18 to16 AWG and has blue colour coded caps at either end
Stock number 782-4759 is for use with a wire range of 14 to12 AWG and has yellow colour coded caps at either end

Standards

Meets or exceeds the following: SAE-AMS-DTL-23053/8 (Insulation sleeve), SAE-AS81824/12
Under qualification for SAE AS81824 and AS81824/12

Splices