TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M5 Stud Size, 1.5mm² to 2.5mm², 16AWG

RS tilauskoodi: 465-659Tuotemerkki: TE ConnectivityValmistajan osanumero.: DR-6-50
brand-logo
Näytä kaikki Ring Terminals tuotteet

Tekninen dokumentti

Tekniset tiedot

Series

Duraseal

Insulation

Insulated

Insulation Material

Nylon

Inner Ring Diameter

5.3mm

Outer Ring Diameter

10mm

Minimum Wire Size mm²

1.5mm²

Maximum Wire Size mm²

2.5mm²

Minimum Wire Size AWG

16AWG

Maximum Wire Size AWG

14AWG

Stud Size

M5

Colour

Blue

Contact Plating

Tin

Contact Material

Copper Alloy

Thickness

2mm

Overall Length

32mm

Alkuperämaa

Mexico

Tuotetiedot

TE Connectivity DuraSeal Ring Terminals

DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

Saatat olla kiinnostunut

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 0,478

1 kpl (50 kpl/pakkaus) (ilman ALV)

€ 0,60

1 kpl (50 kpl/pakkaus) (Sis ALV:n)

TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M5 Stud Size, 1.5mm² to 2.5mm², 16AWG

€ 0,478

1 kpl (50 kpl/pakkaus) (ilman ALV)

€ 0,60

1 kpl (50 kpl/pakkaus) (Sis ALV:n)

TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M5 Stud Size, 1.5mm² to 2.5mm², 16AWG
Varastotiedot eivät ole tilapäisesti saatavilla.

Osta irtotavarana

MääräYksikköhintaPer Pakkaus
50 - 200€ 0,478€ 23,90
250 - 450€ 0,44€ 22,00
500 - 1200€ 0,424€ 21,20
1250 - 2450€ 0,374€ 18,70
2500+€ 0,333€ 16,65
Saatat olla kiinnostunut

Tekninen dokumentti

Tekniset tiedot

Series

Duraseal

Insulation

Insulated

Insulation Material

Nylon

Inner Ring Diameter

5.3mm

Outer Ring Diameter

10mm

Minimum Wire Size mm²

1.5mm²

Maximum Wire Size mm²

2.5mm²

Minimum Wire Size AWG

16AWG

Maximum Wire Size AWG

14AWG

Stud Size

M5

Colour

Blue

Contact Plating

Tin

Contact Material

Copper Alloy

Thickness

2mm

Overall Length

32mm

Alkuperämaa

Mexico

Tuotetiedot

TE Connectivity DuraSeal Ring Terminals

DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

Saatat olla kiinnostunut