Telemecanique Sensors Preventa XCSMP Series Safety Interlock Switch, 2NC/1NO, IP67, Polyamide Housing, 240V ac Max,
Tekninen dokumentti
Tekniset tiedot
Merkki
Telemecanique SensorsNormal State Configuration
2NC/1NO
IP Rating
IP67
Maximum Current
1.5A
Housing Material
Polyamide
Maximum AC Voltage
240V
Maximum DC Voltage
250V
Connection Type
Cable
Series
Preventa XCSMP
Length
87mm
Minimum Operating Temperature
-25°C
Depth
30mm
Width
15mm
Maximum Operating Temperature
+70°C
Width
15mm
Depth
30mm
Alkuperämaa
Japan
Tuotetiedot
XCSMP Safety Interlock Switch
Introducing the new XCS range of safety switches.
The devices have been designed in compliance with the standards currently in effect: IEC 60947, EN 292, EN 60204, EN 1088 to ensure the safety of machine operators and operating reliability.
Protection of operators by stopping the machine when the actuator attached to the machine guard is withdrawn from the head of the switch
When correctly installed they can give a category 3 control circuit per EN 954 or a category 4 control circuit per EN 954 (if combined with the PREVENTA XPS safety module).
Standards
IEC 60947, EN 292, EN 60204, EN 1088
Interlock Switch
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 106,00
€ 106,00 kpl (ilman ALV)
€ 133,03
€ 133,03 kpl (Sis ALV:n)
1
€ 106,00
€ 106,00 kpl (ilman ALV)
€ 133,03
€ 133,03 kpl (Sis ALV:n)
1
Tekninen dokumentti
Tekniset tiedot
Merkki
Telemecanique SensorsNormal State Configuration
2NC/1NO
IP Rating
IP67
Maximum Current
1.5A
Housing Material
Polyamide
Maximum AC Voltage
240V
Maximum DC Voltage
250V
Connection Type
Cable
Series
Preventa XCSMP
Length
87mm
Minimum Operating Temperature
-25°C
Depth
30mm
Width
15mm
Maximum Operating Temperature
+70°C
Width
15mm
Depth
30mm
Alkuperämaa
Japan
Tuotetiedot
XCSMP Safety Interlock Switch
Introducing the new XCS range of safety switches.
The devices have been designed in compliance with the standards currently in effect: IEC 60947, EN 292, EN 60204, EN 1088 to ensure the safety of machine operators and operating reliability.
Protection of operators by stopping the machine when the actuator attached to the machine guard is withdrawn from the head of the switch
When correctly installed they can give a category 3 control circuit per EN 954 or a category 4 control circuit per EN 954 (if combined with the PREVENTA XPS safety module).
Standards
IEC 60947, EN 292, EN 60204, EN 1088