LM319AM/NOPB Texas Instruments, Dual Comparator, DTL, RTL, TTL O/P, 80μs 14-Pin SOIC
Tekninen dokumentti
Tekniset tiedot
Merkki
Texas InstrumentsComparator Type
High Speed
Mounting Type
Surface Mount
Package Type
SOIC
Power Supply Type
Dual
Output Type
DTL, RTL, TTL
Number of Channels per Chip
2
Typical Response Time
80µs
Pin Count
14
Dimensions
8.738 x 3.988 x 1.499mm
Length
8.74mm
Width
3.99mm
Height
1.5mm
Typical Dual Supply Voltage
±13V
Typical Voltage Gain
40 V/mV
Minimum Operating Temperature
0 °C
Maximum Operating Temperature
+70 °C
Tuotetiedot
High Speed Comparators
A range of high speed voltage comparators from Texas Instruments featuring response times of less than 200 ns. The range includes ultra-fast devices such as the TL3016 and TL3116 which have complementary (differential) outputs and typical switching times of 10 ns or less.
Comparators, Texas Instruments
Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
- Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
- Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
- Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 1,30
1 kpl (55 kpl/putki) (ilman ALV)
€ 1,612
1 kpl (55 kpl/putki) (Sis ALV:n)
55
€ 1,30
1 kpl (55 kpl/putki) (ilman ALV)
€ 1,612
1 kpl (55 kpl/putki) (Sis ALV:n)
55
Osta irtotavarana
| Määrä | Yksikköhinta | Per Putki |
|---|---|---|
| 55 - 220 | € 1,30 | € 71,50 |
| 275 - 1045 | € 1,05 | € 57,75 |
| 1100 - 2695 | € 0,923 | € 50,76 |
| 2750+ | € 0,899 | € 49,44 |
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
- Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
- Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
- Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Tekninen dokumentti
Tekniset tiedot
Merkki
Texas InstrumentsComparator Type
High Speed
Mounting Type
Surface Mount
Package Type
SOIC
Power Supply Type
Dual
Output Type
DTL, RTL, TTL
Number of Channels per Chip
2
Typical Response Time
80µs
Pin Count
14
Dimensions
8.738 x 3.988 x 1.499mm
Length
8.74mm
Width
3.99mm
Height
1.5mm
Typical Dual Supply Voltage
±13V
Typical Voltage Gain
40 V/mV
Minimum Operating Temperature
0 °C
Maximum Operating Temperature
+70 °C
Tuotetiedot
High Speed Comparators
A range of high speed voltage comparators from Texas Instruments featuring response times of less than 200 ns. The range includes ultra-fast devices such as the TL3016 and TL3116 which have complementary (differential) outputs and typical switching times of 10 ns or less.
Comparators, Texas Instruments
Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
- Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
- Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
- Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.