TL3016CDR Texas Instruments, Comparator, Complementary O/P, 5 V 8-Pin SOIC
Tekninen dokumentti
Tekniset tiedot
Merkki
Texas InstrumentsComparator Type
General Purpose
Mounting Type
Surface Mount
Package Type
SOIC
Power Supply Type
Dual, Single
Output Type
Complementary
Number of Channels per Chip
1
Pin Count
8
Typical Single Supply Voltage
5 V
Dimensions
4.9 x 3.91 x 1.58mm
Length
4.9mm
Width
3.91mm
Height
1.58mm
Typical CMRR
97dB
Typical Dual Supply Voltage
±5V
Minimum Operating Temperature
0 °C
Maximum Operating Temperature
+70 °C
Tuotetiedot
High Speed Comparators
A range of high speed voltage comparators from Texas Instruments featuring response times of less than 200 ns. The range includes ultra-fast devices such as the TL3016 and TL3116 which have complementary (differential) outputs and typical switching times of 10 ns or less.
Comparators, Texas Instruments
Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
- Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
- Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
- Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 2,30
1 kpl (75 kpl/putki) (ilman ALV)
€ 2,852
1 kpl (75 kpl/putki) (Sis ALV:n)
75
€ 2,30
1 kpl (75 kpl/putki) (ilman ALV)
€ 2,852
1 kpl (75 kpl/putki) (Sis ALV:n)
75
Osta irtotavarana
| Määrä | Yksikköhinta | Per Putki |
|---|---|---|
| 75 - 300 | € 2,30 | € 172,50 |
| 375 - 675 | € 2,05 | € 153,75 |
| 750+ | € 1,85 | € 138,75 |
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
- Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
- Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
- Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Tekninen dokumentti
Tekniset tiedot
Merkki
Texas InstrumentsComparator Type
General Purpose
Mounting Type
Surface Mount
Package Type
SOIC
Power Supply Type
Dual, Single
Output Type
Complementary
Number of Channels per Chip
1
Pin Count
8
Typical Single Supply Voltage
5 V
Dimensions
4.9 x 3.91 x 1.58mm
Length
4.9mm
Width
3.91mm
Height
1.58mm
Typical CMRR
97dB
Typical Dual Supply Voltage
±5V
Minimum Operating Temperature
0 °C
Maximum Operating Temperature
+70 °C
Tuotetiedot
High Speed Comparators
A range of high speed voltage comparators from Texas Instruments featuring response times of less than 200 ns. The range includes ultra-fast devices such as the TL3016 and TL3116 which have complementary (differential) outputs and typical switching times of 10 ns or less.
Comparators, Texas Instruments
Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
- Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
- Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
- Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.