Wago 759 Series PLC Programming Software for Use with I/O System 750

RS tilauskoodi: 882-0338Tuotemerkki: WagoValmistajan osanumero.: 759-302/000-923
brand-logo
Näytä kaikki PLC Accessories tuotteet

Tekninen dokumentti

Tekniset tiedot

Merkki

Wago

Accessory Type

PLC Programming Software

Series

759

For Use With

I/O System 750

Alkuperämaa

Germany

Tuotetiedot

WAGO-I/O-CHECK - Commissioning Tool For WAGO-I/O-SYSTEM 750

WAGO-I/O-CHECK is an easy-to-use Windows application for operating and displaying a WAGO-I/O-SYSTEM 750 node without connecting the node to a fieldbus system.
The software reads the configuration from the node and displays it as an on-screen graphic. The graphic can be printed together with a configuration list as documentation.
With WAGO-I/O-CHECK, it is possible to display and determine the process data of the bus modules. The field wiring, including all sensors and actuators, can thus be checked before startup.
Application-specific settings, such as the baud rate or sensor types, can be made with select interface, Pt100 and thermocouple modules. For communicating between WAGO-I/O-CHECK and the node, the coupler must be connected at a PC’s vacant serial or USB port using the communication cable supplied in the kit with the system.

Wago I/O system range

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 247,68

kpl (ilman ALV)

€ 307,12

kpl (Sis ALV:n)

Wago 759 Series PLC Programming Software for Use with I/O System 750

€ 247,68

kpl (ilman ALV)

€ 307,12

kpl (Sis ALV:n)

Wago 759 Series PLC Programming Software for Use with I/O System 750
Varastotiedot eivät ole tilapäisesti saatavilla.

Tekninen dokumentti

Tekniset tiedot

Merkki

Wago

Accessory Type

PLC Programming Software

Series

759

For Use With

I/O System 750

Alkuperämaa

Germany

Tuotetiedot

WAGO-I/O-CHECK - Commissioning Tool For WAGO-I/O-SYSTEM 750

WAGO-I/O-CHECK is an easy-to-use Windows application for operating and displaying a WAGO-I/O-SYSTEM 750 node without connecting the node to a fieldbus system.
The software reads the configuration from the node and displays it as an on-screen graphic. The graphic can be printed together with a configuration list as documentation.
With WAGO-I/O-CHECK, it is possible to display and determine the process data of the bus modules. The field wiring, including all sensors and actuators, can thus be checked before startup.
Application-specific settings, such as the baud rate or sensor types, can be made with select interface, Pt100 and thermocouple modules. For communicating between WAGO-I/O-CHECK and the node, the coupler must be connected at a PC’s vacant serial or USB port using the communication cable supplied in the kit with the system.

Wago I/O system range