Analog Devices Fixed Series Voltage Reference 10V ±1.0 % 8-Pin PDIP, REF01CPZ

RS tilauskoodi: 111-1103Tuotemerkki: Analog DevicesValmistajan osanumero.: REF01CPZIMPA: 0
brand-logo
Näytä kaikki Voltage References tuotteet

Tekninen dokumentti

Tekniset tiedot

Reference Type

Fixed

Minimum Operating Temperature

-40 °C

Pin Count

8

Maximum Operating Temperature

+85 °C

Mounting Type

Through Hole

Topology

Series

Initial Accuracy

±1.0 %

Nominal Voltage

10V

Maximum Output Current

8mA

Maximum Input Voltage

36 V

Minimum Output Voltage

9.9 V

Maximum Output Voltage

10.1 V

Height

3.43mm

Line Regulation

150 ppm/V

Width

7.24mm

Length

9.27mm

Load Regulation

150 ppm/mA

Package Type

PDIP

Dimensions

9.27 x 7.24 x 3.43mm

Alkuperämaa

United States

Tuotetiedot

Kickspot ECO1 Background Emergency LED Light 320lm / 1hour

The Legrand Kickspot 062564 is an ECO1 IP40 self-contained 1 hour emergency LED lighting unit for flush ceiling mounting. This emergency light will provide 320 lumens of light output for 1 hour during emergency power outage situations.

Approvals

Conforms to NF C 71-800.

Exit Routes & Route Guides

There are two basic types of emergency lighting luminaires - maintained and non-maintained.,Maintained,These luminaires have the advantage of being able to be switched between the maintained function (lamp illuminated at all times) and non-maintained (lamp off until power supply fails), making them ideal for applications such as corridors, workshops and permanently illuminated emergency exit signs.The maintained luminaires also have the facility of being switched in banks of up to ten units.,Non-maintained,These luminaires are only illuminated on a failure of the mains supply. Ideal for emergency exits, switchrooms and storage areas.

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 6,10

1 kpl (50 kpl/putki) (ilman ALV)

€ 7,564

1 kpl (50 kpl/putki) (Sis ALV:n)

Analog Devices Fixed Series Voltage Reference 10V ±1.0 % 8-Pin PDIP, REF01CPZ

€ 6,10

1 kpl (50 kpl/putki) (ilman ALV)

€ 7,564

1 kpl (50 kpl/putki) (Sis ALV:n)

Analog Devices Fixed Series Voltage Reference 10V ±1.0 % 8-Pin PDIP, REF01CPZ
Varastotiedot eivät ole tilapäisesti saatavilla.

Osta irtotavarana

MääräYksikköhintaPer Putki
50 - 50€ 6,10€ 305,00
100 - 200€ 5,10€ 255,00
250 - 450€ 4,60€ 230,00
500+€ 4,45€ 222,50

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja

Tekninen dokumentti

Tekniset tiedot

Reference Type

Fixed

Minimum Operating Temperature

-40 °C

Pin Count

8

Maximum Operating Temperature

+85 °C

Mounting Type

Through Hole

Topology

Series

Initial Accuracy

±1.0 %

Nominal Voltage

10V

Maximum Output Current

8mA

Maximum Input Voltage

36 V

Minimum Output Voltage

9.9 V

Maximum Output Voltage

10.1 V

Height

3.43mm

Line Regulation

150 ppm/V

Width

7.24mm

Length

9.27mm

Load Regulation

150 ppm/mA

Package Type

PDIP

Dimensions

9.27 x 7.24 x 3.43mm

Alkuperämaa

United States

Tuotetiedot

Kickspot ECO1 Background Emergency LED Light 320lm / 1hour

The Legrand Kickspot 062564 is an ECO1 IP40 self-contained 1 hour emergency LED lighting unit for flush ceiling mounting. This emergency light will provide 320 lumens of light output for 1 hour during emergency power outage situations.

Approvals

Conforms to NF C 71-800.

Exit Routes & Route Guides

There are two basic types of emergency lighting luminaires - maintained and non-maintained.,Maintained,These luminaires have the advantage of being able to be switched between the maintained function (lamp illuminated at all times) and non-maintained (lamp off until power supply fails), making them ideal for applications such as corridors, workshops and permanently illuminated emergency exit signs.The maintained luminaires also have the facility of being switched in banks of up to ten units.,Non-maintained,These luminaires are only illuminated on a failure of the mains supply. Ideal for emergency exits, switchrooms and storage areas.

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja