Tekninen dokumentti
Tekniset tiedot
Shaft Diameter
0.76 mm
Number of Turns
1
Orientation
Top Adjust
Minimum Operating Temperature
-55°C
Maximum Resistance
5MΩ
Maximum Operating Temperature
+125°C
Power Rating
0.5W
Termination Style
Solder Pin
Mounting Type
Through Hole
Tolerance
±10%
Temperature Coefficient
±100ppm/°C
Length
9.53mm
Merkki
BournsSeries
3386
Alkuperämaa
Costa Rica
Tuotetiedot
MIT480 Series Telecom Insulation & continuity test
Telecommunication insulation and continuity testers developed to meet the special requirements of telephone line testing, as well as the requirements of electrical contractors and industrial testing to CATIV 600V. All instruments meet TNV3 as well as IEC1010, HD384 and BSEN61557. The insulation test inhibit voltage has been raised to 75V to overcome interference between cables experienced at lower voltages, compared to 50V for standard cable testing.
Supplied with
Hard carry case, rubber boot with stand, silicone test lead set, SP5 remote switch probe, 5 off AA alkaline batteries & instructions (CD-ROM).
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 1,45
kpl (ilman ALV)
€ 1,80
kpl (Sis ALV:n)
Standardi
1
€ 1,45
kpl (ilman ALV)
€ 1,80
kpl (Sis ALV:n)
Standardi
1
Tekninen dokumentti
Tekniset tiedot
Shaft Diameter
0.76 mm
Number of Turns
1
Orientation
Top Adjust
Minimum Operating Temperature
-55°C
Maximum Resistance
5MΩ
Maximum Operating Temperature
+125°C
Power Rating
0.5W
Termination Style
Solder Pin
Mounting Type
Through Hole
Tolerance
±10%
Temperature Coefficient
±100ppm/°C
Length
9.53mm
Merkki
BournsSeries
3386
Alkuperämaa
Costa Rica
Tuotetiedot
MIT480 Series Telecom Insulation & continuity test
Telecommunication insulation and continuity testers developed to meet the special requirements of telephone line testing, as well as the requirements of electrical contractors and industrial testing to CATIV 600V. All instruments meet TNV3 as well as IEC1010, HD384 and BSEN61557. The insulation test inhibit voltage has been raised to 75V to overcome interference between cables experienced at lower voltages, compared to 50V for standard cable testing.
Supplied with
Hard carry case, rubber boot with stand, silicone test lead set, SP5 remote switch probe, 5 off AA alkaline batteries & instructions (CD-ROM).