Festo Pneumatic Guided Cylinder - 170836, 16mm Bore, 40mm Stroke, DFM Series, Double Acting
Tekninen dokumentti
Tekniset tiedot
Merkki
FestoStroke
40mm
Bore
16mm
Manufacturer Series
DFM
Action
Double
Pneumatic Connection
M5
Maximum Operating Pressure
10 bar
Cushioning Type
Elastic
Model Number p
170836
Dimensions
107 x 67 x 32mm
Weight
707g
Maximum Operating Temperature
+80°C
Length
107mm
Height
32mm
Minimum Operating Temperature
-20°C
Width
67mm
Alkuperämaa
Germany
Tuotetiedot
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 342,00
kpl (ilman ALV)
€ 429,21
kpl (Sis ALV:n)
1
€ 342,00
kpl (ilman ALV)
€ 429,21
kpl (Sis ALV:n)
1
Tekninen dokumentti
Tekniset tiedot
Merkki
FestoStroke
40mm
Bore
16mm
Manufacturer Series
DFM
Action
Double
Pneumatic Connection
M5
Maximum Operating Pressure
10 bar
Cushioning Type
Elastic
Model Number p
170836
Dimensions
107 x 67 x 32mm
Weight
707g
Maximum Operating Temperature
+80°C
Length
107mm
Height
32mm
Minimum Operating Temperature
-20°C
Width
67mm
Alkuperämaa
Germany
Tuotetiedot
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.