ITT Cannon Circular Connector, 12 Contacts, Panel Mount, Socket, Female, IP67, Trident Neptune Series
Tekninen dokumentti
Tekniset tiedot
Merkki
ITT CannonNumber Of Contacts
12
Mounting Type
Panel Mount
Connector Size
Standard
Plug/Socket
Socket
Contact Gender
Female
Termination Method
Crimp
IP Rating
IP67
Series
Trident Neptune
Body Orientation
Straight
Housing Material
Polymer
Contact Plating
Nickel
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+105°C
Contact Material
Copper
Alkuperämaa
Hungary
Tuotetiedot
Panel Plug and Socket Shells
Panel plugs and sockets feature the same rear sealing arrangement. Again, the retaining ring may be discarded in favour of a backshell if required.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 23,90
kpl (ilman ALV)
€ 29,99
kpl (Sis ALV:n)
1
€ 23,90
kpl (ilman ALV)
€ 29,99
kpl (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 19 | € 23,90 |
| 20 - 39 | € 21,50 |
| 40+ | € 19,00 |
Tekninen dokumentti
Tekniset tiedot
Merkki
ITT CannonNumber Of Contacts
12
Mounting Type
Panel Mount
Connector Size
Standard
Plug/Socket
Socket
Contact Gender
Female
Termination Method
Crimp
IP Rating
IP67
Series
Trident Neptune
Body Orientation
Straight
Housing Material
Polymer
Contact Plating
Nickel
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+105°C
Contact Material
Copper
Alkuperämaa
Hungary
Tuotetiedot
Panel Plug and Socket Shells
Panel plugs and sockets feature the same rear sealing arrangement. Again, the retaining ring may be discarded in favour of a backshell if required.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.