KEMET Ferrite Flat Cable Ferrite Core, 13 max. wires, Solid Core, Inner dims. 18.8 x 1.1mm
Tekninen dokumentti
Tekniset tiedot
Merkki
KEMETMaximum Number of Wires
13
Type
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
23.8 x 15 x 6.3mm
Inner Dimensions
18.8 x 1.1mm
Inner Height
1.1mm
Inner Width
18.8mm
Outer Depth
15mm
Outer Height
6.3mm
Outer Width
23.8mm
Tuotetiedot
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 0,704
1 kpl (5 kpl/pussi) (ilman ALV)
€ 0,884
1 kpl (5 kpl/pussi) (Sis ALV:n)
Standardi
5
€ 0,704
1 kpl (5 kpl/pussi) (ilman ALV)
€ 0,884
1 kpl (5 kpl/pussi) (Sis ALV:n)
Standardi
5
Osta irtotavarana
| Määrä | Yksikköhinta | Per Pussi |
|---|---|---|
| 5 - 45 | € 0,704 | € 3,52 |
| 50 - 120 | € 0,483 | € 2,42 |
| 125 - 245 | € 0,465 | € 2,32 |
| 250 - 835 | € 0,455 | € 2,28 |
| 840+ | € 0,442 | € 2,21 |
Tekninen dokumentti
Tekniset tiedot
Merkki
KEMETMaximum Number of Wires
13
Type
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
23.8 x 15 x 6.3mm
Inner Dimensions
18.8 x 1.1mm
Inner Height
1.1mm
Inner Width
18.8mm
Outer Depth
15mm
Outer Height
6.3mm
Outer Width
23.8mm
Tuotetiedot
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.