RS PRO Loop Impendance Tester, Loop Impedance Test Type 3 Wire
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProTest Equipment Type
Earth Loop Impedance Tester
Loop Impedance Test Type
3 Wire
PSC Display
Yes
Best Loop Test Accuracy
±2%
Display Type
LCD
Power Source
Mains
Weight
800g
Plug Type
Type G - British 3-pin
Maximum Operating Temperature
+40°C
Minimum Operating Temperature
0°C
Height
70mm
Width
130mm
Length
180mm
Model Number p
IPT1800
Model Number (p)
IPT1800
Alkuperämaa
Taiwan, Province Of China
Tuotetiedot
RS PRO IPT 1800 Digital PSC and Loop Tester
RS PRO IPT 1800 is a great value, microprocessor-controlled PSC/loop tester. Its high loop impedance range permits direct measurement of ground spikes. Features include an auto lock-out if the test resister overheats.
Supplied with
Test Lead with IEC connector (AC cord), external earth probe, neck strap, user manual
Warning
When conducting a test, particularly on earth spikes, do not touch any exposed metal work. If the overheat symbol appears in the display disconnect the device from the mains and allow to cool down.
Standards
EN61557 and BS7671 wiring regulations, EN61010-1 300V CAT III
RS Pro Loop Testers
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 265,00
kpl (ilman ALV)
€ 328,60
kpl (Sis ALV:n)
1
€ 265,00
kpl (ilman ALV)
€ 328,60
kpl (Sis ALV:n)
1
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProTest Equipment Type
Earth Loop Impedance Tester
Loop Impedance Test Type
3 Wire
PSC Display
Yes
Best Loop Test Accuracy
±2%
Display Type
LCD
Power Source
Mains
Weight
800g
Plug Type
Type G - British 3-pin
Maximum Operating Temperature
+40°C
Minimum Operating Temperature
0°C
Height
70mm
Width
130mm
Length
180mm
Model Number p
IPT1800
Model Number (p)
IPT1800
Alkuperämaa
Taiwan, Province Of China
Tuotetiedot
RS PRO IPT 1800 Digital PSC and Loop Tester
RS PRO IPT 1800 is a great value, microprocessor-controlled PSC/loop tester. Its high loop impedance range permits direct measurement of ground spikes. Features include an auto lock-out if the test resister overheats.
Supplied with
Test Lead with IEC connector (AC cord), external earth probe, neck strap, user manual
Warning
When conducting a test, particularly on earth spikes, do not touch any exposed metal work. If the overheat symbol appears in the display disconnect the device from the mains and allow to cool down.
Standards
EN61557 and BS7671 wiring regulations, EN61010-1 300V CAT III