SMC Cylinder Repair Kit CS1N300A-PS, For Use With 300 mm Bore Size Air Cylinder

RS tilauskoodi: 849-7323Tuotemerkki: SMCValmistajan osanumero.: CS1N300A-PSIMPA: 0
brand-logo
Näytä kaikki Pneumatic Cylinder & Actuator Accessories tuotteet

Tekninen dokumentti

Tekniset tiedot

For Use With

300 mm Bore Size Air Cylinder

Manufacturer Series

CS1N

Merkki

SMC

Alkuperämaa

Japan

Tuotetiedot

Hubner+Suhner Adaptors for QMA interfaces

Hubner+Suhner adaptors are used within measuring applications with QMA interfaces. These versatile adaptors support the calibration with Hubne+Suhner open standard interfaces, incorporating the same electrical length and the same return loss behaviour of all this series of adaptors the swapping method can be utilised.

HUBER+SUHNER QMA

The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, resulting in significant time saving during the production of systems. The packaging density of QMA is increased compared to SMA connectors as no torque spanner is required to fasten the coupling nut.

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

P.O.A.

SMC Cylinder Repair Kit CS1N300A-PS, For Use With 300 mm Bore Size Air Cylinder

1

Pakkauskoko 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

SMC Cylinder Repair Kit CS1N300A-PS, For Use With 300 mm Bore Size Air Cylinder
Varastotiedot eivät ole tilapäisesti saatavilla.

1

Pakkauskoko 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Tekninen dokumentti

Tekniset tiedot

For Use With

300 mm Bore Size Air Cylinder

Manufacturer Series

CS1N

Merkki

SMC

Alkuperämaa

Japan

Tuotetiedot

Hubner+Suhner Adaptors for QMA interfaces

Hubner+Suhner adaptors are used within measuring applications with QMA interfaces. These versatile adaptors support the calibration with Hubne+Suhner open standard interfaces, incorporating the same electrical length and the same return loss behaviour of all this series of adaptors the swapping method can be utilised.

HUBER+SUHNER QMA

The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, resulting in significant time saving during the production of systems. The packaging density of QMA is increased compared to SMA connectors as no torque spanner is required to fasten the coupling nut.