TE Connectivity Straight, Polyolefin, 36mm
Tekninen dokumentti
Tekniset tiedot
Merkki
TE ConnectivityType
Straight
Inside Diameter Primary
36mm
Inside Diameter Secondary
36mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+135°C
Shrunk Diameter Primary
22.4mm
Shrunk Diameter Secondary
8.4mm
Standards Met
BS-G-198-5-DA, DEF Std 59-97 Issue 3 Type DA, ELV Compliant, EU, File E85381, SAE AS I 81765/1, Type I, UL 224
Series
202K
Alkuperämaa
Mexico
Tuotetiedot
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
€ 27,10
€ 27,10 kpl (ilman ALV)
€ 34,01
€ 34,01 kpl (Sis ALV:n)
1
€ 27,10
€ 27,10 kpl (ilman ALV)
€ 34,01
€ 34,01 kpl (Sis ALV:n)
Varastotiedot eivät ole tilapäisesti saatavilla.
1
Varastotiedot eivät ole tilapäisesti saatavilla.
| Määrä | Yksikköhinta |
|---|---|
| 1 - 14 | € 27,10 |
| 15 - 49 | € 25,70 |
| 50+ | € 24,90 |
Tekninen dokumentti
Tekniset tiedot
Merkki
TE ConnectivityType
Straight
Inside Diameter Primary
36mm
Inside Diameter Secondary
36mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+135°C
Shrunk Diameter Primary
22.4mm
Shrunk Diameter Secondary
8.4mm
Standards Met
BS-G-198-5-DA, DEF Std 59-97 Issue 3 Type DA, ELV Compliant, EU, File E85381, SAE AS I 81765/1, Type I, UL 224
Series
202K
Alkuperämaa
Mexico
Tuotetiedot
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.