Filterclose-icon
AttributeType open-filters-icon close-filters-icon
AttributeType
Brand open-filters-icon close-filters-icon
Brand
Category open-filters-icon close-filters-icon
Category
Select quantity close-icon
FIMM Stainless Steel Mounting Plate Stainless Steel Plate

FIMM Stainless Steel Mounting Plate Stainless Steel Plate

RS Stock No. 071-7780

Brand FIMM

  • Brand: FIMM
  • Section: Enclosures & Server Racks
  • Super Section: Enclosures

€ 529.61

in stock now

Add to basket
Select quantity close-icon
Schneider Electric Steel Steel Plated Mounting Plate Mounting Plate, 80 mm W, 56 mm L for Use with Enclosure

Schneider Electric Steel Steel Plated Mounting Plate Mounting Plate, 80 mm W, 56 mm L for Use with Enclosure

RS Stock No. 035-7541

Brand Schneider Electric

  • Brand: Schneider Electric
  • Category: Enclosure Covers & Plates
  • Super Section: Enclosures & Racking Components

€ 84.71

in stock now

Add to basket
Select quantity close-icon
FIMM Grey Mounting Plate Steel Plate

FIMM Grey Mounting Plate Steel Plate

RS Stock No. 071-7772

Brand FIMM

  • Brand: FIMM
  • Category: Faceplates & Mounting Plates
  • Super Section: Enclosures

€ 276.10

in stock now

Add to basket
Select quantity close-icon
Virax, 1 Piece Punch & Die Set, 22.5 mm, Circular, Cutting Stainless Steel Sinks or Mild Steel Plate Operation

Virax, 1 Piece Punch & Die Set, 22.5 mm, Circular, Cutting Stainless Steel Sinks or Mild Steel Plate Operation

RS Stock No. 287-9216

Brand Virax

  • Brand: Virax
  • Category: Punch & Die Kits
  • Super Section: Measuring & Marking

€ 106.68

4 in stock now

Add to basket
Select quantity close-icon
Hammond Steel Steel Mounting Plate, 122 mm W, 122 mm L for Use with PCJ664L

Hammond Steel Steel Mounting Plate, 122 mm W, 122 mm L for Use with PCJ664L

RS Stock No. 238-3817

Brand Hammond

  • Brand: Hammond
  • Category: Enclosure Covers & Plates
  • Section: Enclosures & Server Racks

€ 14.06

Temporarily out of stock

Add to basket
Select quantity close-icon
Eaton Sheet Steel Galvanised Steel Mounting Plate Mounting Plate, 110 mm W, 300 mm L for Use with Enclosure

Eaton Sheet Steel Galvanised Steel Mounting Plate Mounting Plate, 110 mm W, 300 mm L for Use with Enclosure

RS Stock No. 023-0192

Brand Eaton

  • Brand: Eaton
  • Category: Enclosure Covers & Plates
  • Super Section: Enclosures & Racking Components

€ 29.37

in stock now

Add to basket
Select quantity close-icon
Festo Mounting Plate Steel Mounting Plate

Festo Mounting Plate Steel Mounting Plate

RS Stock No. 202-2426

Brand Festo

  • Brand: Festo
  • Section: Enclosures & Server Racks
  • Super Section: Enclosures

€ 8.66

Temporarily out of stock

Add to basket
Select quantity close-icon
Molex Premise Networks DIN Rail Enclosure Type, Steel Plate Cold Commercial Rolled Steel 51 mm 125 mm DIN Rail Enclosure

Molex Premise Networks DIN Rail Enclosure Type, Steel Plate Cold Commercial Rolled Steel 51 mm 125 mm DIN Rail Enclosure

RS Stock No. 268-4805

Brand Molex Premise Networks

  • Brand: Molex Premise Networks
  • Section: Enclosures & Server Racks
  • Super Section: Enclosures

€ 88.48

6 in stock now

Add to basket
Select quantity close-icon
Eaton Grey Mounting Plate Steel Mounting Plate

Eaton Grey Mounting Plate Steel Mounting Plate

RS Stock No. 012-5030

Brand Eaton

  • Brand: Eaton
  • Manufacturer: Eaton
  • Section: Enclosures & Server Racks

€ 121.74

in stock now

Add to basket
Select quantity close-icon
Hammond Steel Steel Mounting Plate, 276 mm W, 323 mm L for Use with PCJ14126L

Hammond Steel Steel Mounting Plate, 276 mm W, 323 mm L for Use with PCJ14126L

RS Stock No. 238-3823

Brand Hammond

  • Brand: Hammond
  • Section: Enclosures & Server Racks
  • Super Section: Enclosures & Racking Components

€ 38.15

Temporarily out of stock

Add to basket
Select quantity close-icon
Hammond Steel Steel Mounting Plate, 123 mm W, 171 mm L for Use with PCJ864L

Hammond Steel Steel Mounting Plate, 123 mm W, 171 mm L for Use with PCJ864L

RS Stock No. 238-3819

Brand Hammond

  • Brand: Hammond
  • Category: Enclosure Covers & Plates
  • Super Section: Enclosures & Racking Components

€ 15.94

Temporarily out of stock

Add to basket
Select quantity close-icon
Hammond Steel Steel Mounting Plate, 174 mm W, 171 mm L for Use with PCJ884L

Hammond Steel Steel Mounting Plate, 174 mm W, 171 mm L for Use with PCJ884L

RS Stock No. 238-3820

Brand Hammond

  • Brand: Hammond
  • Section: Enclosures & Server Racks
  • Super Section: Enclosures & Racking Components

€ 19.20

Temporarily out of stock

Add to basket
Select quantity close-icon
Eaton Grey Mounting Plate Steel Mounting Plate

Eaton Grey Mounting Plate Steel Mounting Plate

RS Stock No. 012-4848

Brand Eaton

  • Brand: Eaton
  • Category: Faceplates & Mounting Plates
  • Super Section: Enclosures

€ 593.62

in stock now

Add to basket
Select quantity close-icon
Eaton Grey Mounting Plate Steel Mounting Plate

Eaton Grey Mounting Plate Steel Mounting Plate

RS Stock No. 012-5031

Brand Eaton

  • Brand: Eaton
  • Section: Enclosures & Server Racks
  • Super Section: Enclosures

€ 154.37

in stock now

Add to basket
Select quantity close-icon
Eaton Grey Mounting Plate Steel Mounting Plate

Eaton Grey Mounting Plate Steel Mounting Plate

RS Stock No. 012-5032

Brand Eaton

  • Brand: Eaton
  • Category: Faceplates & Mounting Plates
  • Super Section: Enclosures

€ 176.96

in stock now

Add to basket
Select quantity close-icon
Eaton Grey Mounting Plate Steel Mounting Plate

Eaton Grey Mounting Plate Steel Mounting Plate

RS Stock No. 012-5035

Brand Eaton

  • Category: Faceplates & Mounting Plates
  • Section: Enclosures & Server Racks
  • Super Section: Enclosures

€ 240.96

in stock now

Add to basket
Select quantity close-icon
Eaton Grey Mounting Plate Steel Mounting Plate

Eaton Grey Mounting Plate Steel Mounting Plate

RS Stock No. 012-5038

Brand Eaton

  • Brand: Eaton
  • Section: Enclosures & Server Racks
  • Super Section: Enclosures

€ 262.30

in stock now

Add to basket
Select quantity close-icon
CAMDENBOSS Steel Steel Mounting Plate, 161 mm W, 101 mm L for Use with X SERIES HEAVY DUTY ENCLOSURES

CAMDENBOSS Steel Steel Mounting Plate, 161 mm W, 101 mm L for Use with X SERIES HEAVY DUTY ENCLOSURES

RS Stock No. 280-5391

Brand CAMDENBOSS

  • Brand: CAMDENBOSS
  • Category: Enclosure Covers & Plates
  • Section: Enclosures & Server Racks

€ 5.33

21 in stock now

Add to basket
Select quantity close-icon
Eaton Grey Mounting Plate Steel Mounting Plate

Eaton Grey Mounting Plate Steel Mounting Plate

RS Stock No. 012-5037

Brand Eaton

  • Brand: Eaton
  • Manufacturer: Eaton
  • Material: Steel

€ 225.90

in stock now

Add to basket
Select quantity close-icon
Siemens Grey Mounting Plate Sheet Steel Mounting Plate

Siemens Grey Mounting Plate Sheet Steel Mounting Plate

RS Stock No. 062-7480

Brand Siemens

  • Brand: Siemens
  • Plate Type: Mounting Plate
  • Section: Enclosures & Server Racks

€ 165.66

in stock now

Add to basket
Select quantity close-icon
Eaton Grey Mounting Plate Steel Mounting Plate

Eaton Grey Mounting Plate Steel Mounting Plate

RS Stock No. 012-5034

Brand Eaton

  • Brand: Eaton
  • Category: Faceplates & Mounting Plates
  • Super Section: Enclosures

€ 202.06

in stock now

Add to basket
Select quantity close-icon
Eaton Light Grey Blind Plate Steel Blanking Plate

Eaton Light Grey Blind Plate Steel Blanking Plate

RS Stock No. 010-3849

Brand Eaton

  • Category: Faceplates & Mounting Plates
  • Section: Enclosures & Server Racks
  • Super Section: Enclosures

€ 27.99

in stock now

Add to basket
Select quantity close-icon
Siemens Grey Mounting Plate Sheet Steel Mounting Plate

Siemens Grey Mounting Plate Sheet Steel Mounting Plate

RS Stock No. 062-7179

Brand Siemens

  • Brand: Siemens
  • Material: Sheet Steel
  • Super Section: Enclosures

€ 121.11

in stock now

Add to basket
Select quantity close-icon
Siemens Grey Mounting Plate Sheet Steel Mounting Plate

Siemens Grey Mounting Plate Sheet Steel Mounting Plate

RS Stock No. 062-7222

Brand Siemens

  • Material: Sheet Steel
  • Section: Enclosures & Server Racks
  • Super Section: Enclosures

€ 121.11

in stock now

Add to basket

...

What is a steel plate?
A steel plate is a flat, solid sheet of steel with a uniform thickness across its surface. It is produced in a range of thicknesses from thin gauge to very thick slabs and is used as a foundational material in construction, manufacturing, and engineering. Steel plates are available in several families, including carbon steel plate, stainless steel plate, and alloy steel plate, each offering different mechanical properties, corrosion resistance, and heat tolerance. The term “plate” distinguishes these flat sections from thinner sheets and heavier structural profiles, and it is common to specify grade, thickness, width, and length when ordering. At RS Components, customers can find a wide assortment of steel plate options, including hot rolled steel plate for general fabrication, cold rolled steel plate for tighter tolerances, and specialty plates for demanding environments.

How do I choose between carbon steel plate, stainless steel plate, and alloy steel plate?
Each type serves different application needs:
  • Carbon steel plate: cost-effective and widely used for structural components, tooling plates, and general fabrication. Strength and hardness depend on carbon content and heat treatment; it is susceptible to corrosion if not protected in outdoor or humid conditions.
  • Stainless steel plate: excellent corrosion resistance, hygiene, and aesthetics. Ideal for food processing, chemical equipment, architectural facades, and environments with moisture or salt exposure. Alloys like chromium and nickel stabilize stainless grades such as 304 and 316, providing enduring resistance but at a higher price.
  • Alloy steel plate: engineered for high strength, toughness, and abrasion resistance. Often used in heavy machinery, transport, and pressure vessels where performance under stress is critical.
Consider factors such as corrosion exposure, temperature range, mechanical loads, fabrication method (cutting, welding, forming), and budget when selecting steel plate grade. For many general projects, a standard carbon steel plate with a suitable coating or paint system offers a practical balance between cost and performance. RS Components stocks a broad range of grades to match these needs.

What thicknesses and sizes are available for steel plate?
Steel plate is produced in a wide spectrum of thicknesses and dimensions to suit diverse applications. Typical thicknesses range from approximately 1.5 mm up to 150 mm or more for heavy structural work. Widths and lengths vary, with common plate sizes such as 1000 mm × 2000 mm, 1200 mm × 2400 mm, and 1500 mm × 3000 mm, though custom cutting and sizing services are often available. The exact dimensions you select depend on the mechanical requirements, weight considerations, and the fabrication methods you plan to use. If you need non-standard sizes, many RS Components suppliers offer cut-to-size services or stock a variety of standard formats to minimize waste and simplify assembly.

How do I cut and form steel plate safely and accurately?
Cutting and forming steel plate requires attention to thickness, grade, and post-cut finishing. Recommended approaches include:
  • Sawing and shearing for thinner plates, providing clean edges suitable for drilling or welding.
  • Plasma cutting for a fast, versatile method that works on a wide range of thicknesses with clean kerf and manageable heat input.
  • Laser cutting for high-precision, tight-tolerance parts, especially on thinner or mid-thickness plates.
  • Waterjet cutting for materials that require heat-free processing or when complex shapes are needed.
Always wear appropriate PPE, secure the workpiece, and deburr edges after cutting to prevent injuries and ensure better fit-up during welding or assembly. For stainless steel or alloy plates, consider heat-affected zone control and potential work hardening topics when selecting cutting methods. When in doubt, consult RS Components’ technical datasheets for recommended cutting parameters for each grade.

What are the key considerations for welding and fabricating with steel plate?
Welding and fabrication demand careful material selection and process controls:
  • Material compatibility: match filler metal and shielding gas to the plate grade (carbon steel, stainless steel, or alloy steel) to avoid corrosion and strength issues.
  • Preheating and interpass temperatures: some steels require preheating to reduce thermal shock and minimize cracking, especially thick sections and high-carbon grades.
  • Post-weld heat treatment: may be necessary for certain alloy grades to relieve residual stresses and improve toughness.
  • Surface preparation: clean, rust-free surfaces improve weld quality; consider rust inhibitors or cleaning standards for stainless grades.
  • Welding methods: MIG or TIG welding are common for plate fabrication; for thicker carbon steels, shielded metal arc welding (SMAW) or submerged arc welding (SAW) might be appropriate.
Proper training and procedure qualification are essential. Always consult the plate’s material specification and follow applicable welding codes. RS Components provides technical data sheets and recommended filler metals for each steel plate grade to help you choose compatible consumables.

What finishes and coatings help protect steel plate from corrosion?
Finishes and coatings extend the life of steel plates in challenging environments. Options include:
  • Primer coatings and paint systems for outdoor exposure and display applications.
  • Galvanizing (hot-dip or electroplated) for excellent corrosion resistance, especially in coastal or industrial atmospheres.
  • Powder coating for wear resistance, color stability, and aesthetic appeal on structural and architectural plates.
  • Weathering steel (such as certain high-strength plates) that develops a protective patina in outdoor environments.
Selection depends on environment, maintenance plans, and expected service life. Always prepare the surface according to the coating system requirements and follow curing times to maximize performance. RS Components carries a range of coatings and protective solutions designed to complement steel plate stock.

What are common standards and grades for steel plate I should know?
Standards help ensure material properties, thickness tolerances, and dimensions meet project requirements. Common families include:
  • Carbon steel plate grades like A36, S235JR, or equivalent based on regional standards.
  • Stainless steel plate grades such as 304, 316, or 410 families, offering varying corrosion resistance and mechanical properties.
  • Alloy steel plate grades designed for higher strength and abrasion resistance, often used in heavy machinery and tooling.
When ordering, verify the applicable standard (ASTM, EN, JIS, or regional equivalents), thickness tolerances, surface finish, and any required heat treatment. RS Components provides spec sheets and mill certificates to confirm grade, chemical composition, and mechanical properties for each plate. This ensures you select the right steel plate for structural, mechanical, or architectural applications.

How should I store and handle steel plate to prevent damage?
Proper storage minimizes corrosion, deformation, and edge damage:
  • Store in a dry, ventilated area away from direct moisture and salts to minimize rust formation on carbon steel plates.
  • Use rollers or skids to keep plates off the floor and allow air circulation beneath the stack.
  • Keep weights evenly distributed to prevent bending or bowing of thin plates.
  • Cover stacks with breathable material to protect surface finish while preventing condensation buildup.
  • Handle with appropriate lifting equipment and use protective edge guards to prevent injuries and edge dents.
Following these practices helps maintain dimensional stability and surface quality for long-term performance. RS Components can supply protective packaging and storage recommendations alongside steel plate purchases.

How can RS Components help me source steel plate efficiently?
RS Components offers a broad portfolio of steel plate products from trusted mills, with detailed datasheets, material certifications, and exacting cut-to-size services where available. Benefits include:
  • Wide range of grades: carbon steel, stainless steel, and alloy steel plates to cover structural, architectural, and mechanical needs.
  • Various finishes and thicknesses to match design specifications and fabrication methods such as welding, grinding, or machining.
  • Flexible delivery options, local stock, and reliable lead times for project planning and inventory control.
  • Technical support, material certification, and compatibility guidance for cutting, coating, and joining processes.
When planning a steel plate order, consider the required grade, thickness tolerance, surface finish, coating needs, and preferred delivery schedule. RS Components’ listings are designed to streamline selection, comparison, and procurement for engineers, fabricators, and maintenance teams.

Steel tools Steel Bar Safety Boots Steel Metal plates Steel Wire Relay 2 Pole Omron micros BNC Mount Panel indicators Erem Tweezers