2 1/8 Tuumaa - RS Finland

Blade Material

Carbide (17)

Tungsten Carbide (14)

Bi-Metal (2)

Steel (2)

HCS (1)

Metal (1)

Polycrystalline Diamond (1)

Material Cut

Wood (23)

Multi Material (4)

Brass, Aluminium, Copper (3)

Aluminium, Brass, Polyvinyl Chloride, Copper, Wood (1)

Copper, Aluminium, Brass (1)

Copper, Brass, Polyvinyl Chloride, Wood, Aluminium (1)

Metal, Wood (1)

Stone, Glass, Metal, Wood, Plastic, Cast Iron, Non-Ferrous, Reinforced Concrete, Nail Embedded Wood, Suspended Floors, Plaster, Aluminium, Blockwork, Acrylic, Fibreglass, Copper, Stainless Steel, Porcelain, Non-Metallics, Veneer, MDF, Steel, Brick and Masonry, Marble/Granite, Ceramic (1)

Synthetic Material, Non-Ferrous Metal, Wood (1)

Kerf Thickness

2.6mm (13)

2.8mm (9)

2.4mm (5)

2.3mm (4)

1.8mm (2)

2.5mm (1)

2mm (1)

Tooth Configuration

Alternate Top Bevel (12)

TCG (7)

ATB (6)

HLTCG (4)

TCT (2)

Deep Tooth (1)

FT (1)

FTG (1)

Plate Thickness

1.8mm (29)

1.2mm (2)

Arbor Diameter

30mm (26)

20mm (3)

16mm (1)

Rake Angle

-5° (16)

15° (5)

0° (2)

10° (2)

16° (1)

Cut Type

Fine (5)

Fast Coarse (3)

Smooth (2)

Straight (2)

Coarse (1)

Medium (1)

Maximum Speed

7000rpm (5)

6500rpm (3)

6000rpm (2)

8000rpm (2)

15000rpm (1)

7600rpm (1)

Material

Steel (5)

31Crv3 (1)

Aluminium (1)

Chrome Vanadium Steel (1)

Filled Polypropylene Head, Nitrile O-Ring, Transparent San Bowl (1)

Foam (1)

Polycarbonate (1)

Textile (1)

Vanadium Steel 31Crv3 (1)

Drive Size

1/4 in (4)

1/2 in (1)

1/4"inch (1)

3/4 in (1)

3/8 in (1)

Overall Length

202mm (1)

250mm (1)

50mm (1)

540mm (1)

65mm (1)

660mm (1)

77mm (1)

9in (1)

Colour

Black (5)

Black, Red, White (1)

Clear (1)

Length

79.5mm (2)

126mm (1)

140.8mm (1)

19mm (1)

26.8mm (1)

5.3cm (1)

Maximum Operating Temperature

60°C (2)

85°C (2)

130°C (1)

290°C (1)

50°C (1)

Rack Unit

1U (4)

15U (1)

2U (1)

8U (1)

Set Contents

1/4 Inch Male To 1/4 Inch Hex Adaptor, 72 Teeth Ratchet, Coupler Adaptor, 2" & 4" Extension Bars, 3/8In.Female To 1/4 Inch Male Adaptor, Spinner Handle, Universal Joint (1)

1/4 Inch Socket No. 20 L 4, 4.5, 5, 6, 7, 8, 9, 10, 12, 13 mm, 1/4 Inch Screwdriver Bit No. 680 4, 5.5, 6.5, 8 mm, 1/4 Inch Screwdriver Bit No. 685 2.5, 3, 4, 5, 6 mm, 1/4 Inch Screwdriver Bit No. 685 X 5, 6, 8 mm, 1/4 Inch Screwdriver Bit No. 687 TX T6, (1)

2 x 3/8" Extension, 2 x 3/8" Bit Holder with Retaining Clip, 3/8" Hinged Bar, 3/8" Flexible Extension, 13 x 3/8" Socket, 9 x Bits Series 1, 3/8" Brace, 3/8" Sliding Tee, 6 x Bits Series 2, 13 x 3/8" Long-Reach Inch-Size Socket, 3/8" Universal Cardan (1)

8 x 1/2 Inch Impact Torx Socket Set (1)

Accessories, Cross Handle with Sliding Piece 3287, Inserts D 7/8 inch, D 15/16 inch, D 1 inch, D 1.1/16 inch, D 1.1/8 inch, D 1.1/4 inch, D 1.5/16 inch, D 1.3/8 inch, D 1.1/2 inch, D 1.11/16 inch, D 1.7/8 inch, D 2 inch, Inserts D 22, D 24, D 27, D 30, D (1)

Long sockets (1)

Ratchet 2093 U-20, Inserts 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 11/32, 13/32, 3/8, 7/16, 1/2, 620, 676 (1/4 inch Multi Handle), 680 (4, 5.5, 6.5), 685 (1/4 inch, 1/4 inch Double), 687 TX T10, T15, T20, T25, T27, T30, T40, 690 (1, 2), 690 PZD (1, 2, 3), Acces (1)

Drive Type

Square (5)

Hex (1)

Socket Type

12 Point (2)

Hexagon (2)

6 Point (1)

Deep, Regular (1)

Width

25mm (2)

140.8mm (1)

16.8cm (1)

2.8 mm (1)

85mm (1)

Case Material

316L Stainless Steel (1)

Chrome Nickel Steel (1)

Chromium, Nickel, Steel (1)

Plastic (1)

Steel, Chromium, Nickel (1)

Connection Location

Back Entry (3)

Bottom Entry (2)

Connection Size

1/8 in NPT (4)

DN 50.8 (1)

Dial Size

40mm (4)

100mm (1)

Finish

Forged (2)

Bright Chrome (1)

Corrosion Resistant (1)

Round (1)

Maximum Pressure Measurement

2.5bar (2)

10bar (1)

2bar (1)

5bar (1)

Minimum Pressure Measurement

0bar (4)

-1bar (1)

Pressure Connection

1/8 inch NPT Male (4)

2 inch (1)

VDE/1000V Approved

No (4)

Yes (1)

Weight

1.8kg (2)

11.1kg (1)

2.8kg (1)

33.5lb (1)

Connection Type

Process (3)

Push-In Fitting (1)

Dial Colour

White (3)

Red (1)

Minimum Operating Temperature

-25°C (2)

-40°C (1)

-5°C (1)

Sub Type

Cable Management Panel (1)

Driver Bit (1)

Fan Tray (1)

Fan Unit (1)

Blade Length

300mm (1)

50mm (1)

75mm (1)

Blade Thickness

1.2mm (2)

1.3mm (1)

External Depth

265mm (1)

365mm (1)

44mm (1)

External Height

330mm (1)

40.2mm (1)

84.6mm (1)

External Width

482.6mm (2)

422mm (1)

"2 1/8 Tuumaa"

Festo Solenoid Valve CPE14-M1BH-3GLS-1/8, 3 Port, 3/2-Way, 1/8 inch

STAHLWILLE Ring Spanner 1 (inch) 3/8 in Size 2 (inch) 7/16 inch, 250 mm Overall

Bondhus T Metric, inch Hex Key, Hex size 3/8 in, 2.5, 1/4, 9/64, 2, 10 mm, 8, 5, 7/32, 4, 6, 1/8, 3, 7/64, 5/32, 5/16,

Gedore 25-Piece 3/4 in Hexagon Wrench Set

Gedore 20-Piece 1/4 in Tool Assortment

Gedore 37-Piece 1/4 in Hexagon Wrench Set

Starrett, 8 Teeth Per Inch Stone, Glass, Metal, Wood, Plastic, Cast Iron, Non-Ferrous, Reinforced Concrete, Nail

ERKO, 8 Teeth Per Inch Wood 75 mm HCS 5

StarTech.com Black 8 U Steel Server Rack, with 2 Post Frame, 45.3 mm, 446 mm Height 446 mm

nVent SCHROFF 20808 Series Handle for Use with Front Panels, 1 Per Pack Piece(s) 15.4 mm 140.8 mm 140.8mm

StarTech.com Black 15 U Steel Server Rack, with 2 Post Frame, 20.1 in, 773 mm Height 19.8 in

FEIN, 14 Teeth Per Inch Metal, Wood Bi-Metal 5

Teng Tools 89-Piece 1/4 in Deep, Regular Socket Set

WIKA 1/8 in NPT Pressure Gauge, 40 mm, 2 bar

Facom 8-Piece 1/2 in 6 Point Impact Socket Set

Teng Tools 3 Piece Electrician Tool Kit Tool Kit with Trolley VDE/1000V Approved

MOXA Rack Mounting Kit for Use with UPort 1600-16 Series, NPort 6600-32 Series, NPort 6600-16 Series, NPort 6600-8

DeWALT 8 Teeth Per Inch Multi Material 1 216 mm

WIKA 1/8 in NPT Process Pressure Gauge, 40 mm, 2.5 bar

Phoenix Contact 2 Fan Fan Unit, 1 U

StarTech.com Steel Cable Management Panel Cable Management Panel for Use with CM Series, 19 mm, 2.8 mm

WIKA 1/8 in NPT Process Pressure Gauge, 40 mm, 2.5 bar

METCASE, 1 U 19 in Rack Mount Case Combimet Ventilated 365 mm, 482.6 mm 40.2 mm

METCASE, 2 U 19 in Rack Mount Case Combimet Ventilated 265 mm, 482.6 mm 84.6 mm